Identificador: 1144
Abierta
Descripción
ELCON 320 DSX-E TO CUT THROUGHT 0-135 MM AUMINUM
A vertical panel saw can be used to cut through various materials, like wood based,plastics, composites etc.
This episode's custom built Elcon panel saw was developed to cut through aluminium tailgate / cargolift. A bar code scanner tells the machine to cut off the left and left and right side. The sawing speed is automatically adjusted to the thickness of the material, in this case up to 135mm!
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
PARTE: 12229 – BASTONERA – MOTOR 15
HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
USADA
– MUY BUENAS CONDICIONES
LARGOS MINIMOS: 16”
VELOCIDAD VARIABLE: 75 A 250 PIES LINELES POR MINUTOS
MOTOR PRINCIPAL: 15 HP, 3,600 A 5,000 RPM
MOTOR ALIMENTADOR: 5 HP
TAMANO MAQUINA: 42” W X 48” L X 46” H
TAMANO MAQUINA CON HOPPER: 42” W X 88” L X 46” H
PESO: 3,000 LBS
VARIOS RODILLOS DE ENTRADA Y SALIDA
VARIOS DIAMETROS DE CABEZALES
VARIOS JUEGOS ...
AMXmachinery
PARTE: 3EA -TS300K - ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
PARTE: 3EA -TS300K -
ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
Nueva con garantíaFeaturesMax.keyway width per cut :16mmMax. stroke : 300mmNo. of stroke per minute: 8 steps(Low: 22,26, 31, 39spm ; High :44,52,61,78 spm)- Spindle motor : 5HP (4P/8P)- Working table : Dia. 560mm- Inner hole dia. of table : Dia. 75mmStandard Accessories1. Lubrication system2. Rotary table3. Tool box & tools4. Rubber chip cover (4pcs/set)5. Chip box Optional Accessories2. SK-9 Strong 3 Jaw scroll chuck 1PC...
AMXmachinery
PARTE: AMX-10200 - SIERRA PARA CUBIERTAS DE COCINA - MOTOR 5 HP, 3 FASES
PARTE:
AMX-10200 - SIERRA PARA CUBIERTAS DE COCINA - MOTOR 5 HP, 3 FASESNUEVA CON GARANTIADISCO CORTADOR 14" MOTOR 5 HP, 220V, 3 FASESARRANCADOR INCLUIDOMEDIDAS TOTALES: 1.5 MTS FONDO X 1.3 MTS FRENTE X 1.1 MTS ALTOALTURA MESA: 70 CMSOPCIONAL:MOTOR 5 HP, 220V, 2 FASES- NO INCLUYE LA PLANTILLA QUE SE VE EN LAS FOTOS PARA COLOCAR LAS CUBIERTAS