Identificador: 360
Abierta
Descripción
PARTE # 2SS-C4 – SIERRA VERTICAL – MOTOR 3 ¼ HP – CAP. 50” ALTO X 96” LARGO – 1 ¾ “ espesor
NUEVA CON GARANTIA
CORTE VERTICAL: 50"
CORTE HORIZONTAL: 96"
ESPESOR CORTE: 1-3/4"
DIAMETRO SIERRA: 8"
MOTOR: 15 AMP, 120V, 220V
LARGO DEL MARCO: 60"
DATOS DE ENVIO
PESO: 189 LBS
DIMENSIONES: 60 X 11 X 70 PULGADAS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERS
PARTE: 11787 – LIJADORA DE CEPILLOS Y DISCOS - TIMESAVERSEn buenas condicionesModelo: 337-6RPRotary polisher has six (6) 1/2HP counter-rotating arbors with fladder-style abrasives.Rotation 12-35 RPM, 2HP variable feed 15-45 FPM on conveyor belt with vacuum bed. (Less vacuum pump unit).36” width capacity. Each arbor/spindle is 12”-long x 2”-diameter, arbor speed 100-1200 RPM, with LED readout on RPM. 0” – 6” motorized part thickness opening.Infeed and outfeed pinch rolls.Wired 460V...
AMXmachinery
TRISCADORA 10-45 MM
PART # 4VF-SV45MN - TRISCADORA PARA SIERRA CINTAS 10 -45 MMNueva con garantiaPossibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree; self centring clamps. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,00 mmBandsaw Width [min-max]: 10 – 45 mmSetting Pitch [min-max]: 5 – 25 mmTwo types of setting: Net – Gross Weight: 3,8 – 4,5 kgMachine Dimensions [D x W x H]: 35 x...
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0190 - POSTFORMADORA - 12 PIES LARGO 1 LADO - EVANS 0190Para hacer dobles para Back Splash- 110V, 1 phase, 15 amps- 220V, 1 phase, 8 amps- Air: 80 PSI - 12' maximum capacity (3660 mm)- Back Splash Height: Minimum 1" (25 mm), Maximum 34" (860 mm) - Possible coving radios: 1/8" (3 mm) , 3/16" (5 mm), 3/8" (10 mm)- Crated weight 1800 LBS. - Shipping dimensions 182” long X 34” wide X 50” high- Bends inside cove bends for back splashes. The 0190 is available with either...
AMXmachinery
SIERRA CINTA – VOLANTES 40” – 15 HP - CON ALIMENTADOR – PEHAKA
PARTE: 12226 – SIERRA CINTA – VOLANTES 40” – 15 HP - CON
ALIMENTADOR – PEHAKA
USADA – MUY BUENAS CONDICIONES
saw wheel
diameter 1050 mm
cutting height
max. 450 mm
hydraulic tilt table
45°
infeed roll
driven by motor
infeed speed
2,5/5/7,5/15 m/min.
motor power 11 Kw
(15 HP)
table size 1100
mm x 1050 mm
cutting width
(distance between saw stand and sawblade) 1020 mm
diameter of the
connection for a dust suction pipe
overall size: L
22...