Identificador: 354
Abierta
Descripción
PARTE: 3YH-YFC-14 – SIERRA TRONZADORA – 5 HP – SIERRA 14” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
Cutting capacity (Thickness x Width)：1" x 10", 2" x 9", 3" x 8"
Cycle speed：95 cuts/min
Cycle operation：Pneumatic
Saw blade diameter (Option)：ø14"
Saw arbor diameter：ø1"/ 30mm
Saw blade speed ：4100 rpm
Dust exhaust diameter：ø4" x (1)
Saw arbor motor：5HP / 7.5HP
Table size：630X 590mm
Net weight：240 kgs
Gross weight：290 kgs
Packing dimensions(LxWxH)：770x 760x 1300mm
FEATURES
Table surface is precision ground, assuring cutting accuracy.
The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
Cycle speed is adjustable and up to 95 strokes per minute.
Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
Powerful 5HP (7.5HP) motor drive.
T-clamp is easily adjusted for workpiece thickness variation.
Convenient and fast sawblade replacement.
Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: SL-DC-DJ20 - CANTEADORA DE 8" - 1.5 HP
PARTE: SL-DC-DJ20 - CANTEADORA DE 8" - 1.5 HPNUEVA CON GARANTIAMotor1.5 HP, 120/220 Volts, 1 FaseAncho máximo de desbaste8"Máxima profundidad de corte8" x 1/8", 4" x 1/4", 2" x 1/4"Capacidad máx. de traslape1/2"Inclinacion de la guía45° , 90° y 135°Dimensiones de la mesa de entrada43 -3/8" x 8"de salida31" x 8"altura32"Dimensiones de la guía36" x 5"Peso de la maquina207 kg.Tipo de empaque2 cajasCantidad de cuchillas3 piezas
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALESNUEVA CON GARANTIACARACTERISTICAS220V/60HZ/3PH1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HPFeeding motor: 3Kw – 4 HP Stepless variable fe...
AMXmachinery
CALIBRADORA - PULIDORA 54” ANCHO
PARTE: 11760 - CALIBRADORA - PULIDORA 54” ANCHO
9 - CALIBRADORA-PULIDORA IND
G.H 54
AMXmachinery
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
PARTE: 2TA-SET-106TS –
ESPIGADORA DOBLE DE CADENA – 6 CABEZAS – 120” ANCHO
Nueva con garantiaOpcionales:Extra Infeed 42” LengthTotal Enclosure CoverFeed MagazineAuto Transfer Line (4 ft x 8 ft) Transfer TableOptional Jump Shaper and Finish Shaper Cutter headsOptional Center Split Saw Station Features:• The automatic high-speed through feed device allows for
perfect finishing at speeds rangingfrom 12 ~ 52 FPM.• Suitable for mass production of woodworking factory for
processin...