Identificador: 354
Abierta
Descripción
PARTE: 3YH-YFC-14 – SIERRA TRONZADORA – 5 HP – SIERRA 14” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
Cutting capacity (Thickness x Width)：1" x 10", 2" x 9", 3" x 8"
Cycle speed：95 cuts/min
Cycle operation：Pneumatic
Saw blade diameter (Option)：ø14"
Saw arbor diameter：ø1"/ 30mm
Saw blade speed ：4100 rpm
Dust exhaust diameter：ø4" x (1)
Saw arbor motor：5HP / 7.5HP
Table size：630X 590mm
Net weight：240 kgs
Gross weight：290 kgs
Packing dimensions(LxWxH)：770x 760x 1300mm
FEATURES
Table surface is precision ground, assuring cutting accuracy.
The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
Cycle speed is adjustable and up to 95 strokes per minute.
Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
Powerful 5HP (7.5HP) motor drive.
T-clamp is easily adjusted for workpiece thickness variation.
Convenient and fast sawblade replacement.
Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO PARA MADERA DE 60 CMS 2400 RPM 12 HP
PARTE: 12405-16 - TORNO PARA MADERA
DE 60 CMS 2400 RPM 12 HP
USADA - BUENAS CONDICIONES
220V, 3 FASES
AMXmachinery
PARTE: 1SL-DC-MS3840 - ESCOPLO VERTICAL - MOTOR 1 HP
PARTE: 1SL-DC-MS3840 - ESCOPLO VERTICAL - MOTOR 1 HPNUEVO CON GARANTIAMotor1 H.P., 110V.,60Hz, MonofásicoCapacidad del cortador1/4” - 1”Zanco del cortador3/4”Desplazamiento del cabezal210 mm.Velocidad1720 rpm.Tamaño del buje del escoplo3/4”Capacidad del broquero3 - 16 mm.Mov. lateral de la mesa180 mm.Mov. transversal de la mesa100 mm.Dimensiones de la mesa450 x 150 mm.Altura máxima de la madera200 mm.Ancho máximo de la madera140 mm.Peso139 Kg.Tipo de empaque1 caja
AMXmachinery
COMPRESOR DE TORNILLO - 50 HP
PARTE: 12341 - COMPRESOR DE TORNILLO - 50 HP
USADO - BUENAS CONDICIONES
230/460V
Nominal 100 PSI, 110 Maximum
Nominal 236 Cubic Feet Per Minute Depending on Pressure
Setting
Variable Frequency Drive
Weight: 3000 lbs
Dimensions: 48" L x 72" W x 64" H
Recently serviced and ready to go!
AMXmachinery
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER DNuevo con garantíaMeasuringRange5-60% dependent upon species setting*Display0.1% resolution for the entire range.SpeciesCorrections71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100)GypsumScaleN/AReferenceScale0-99 for non-wood building materialsCalibrationStable calibration not affected by ambient temperature. Calibration is internally checked and auto...