Identificador: 1542
Abierta
Descripción
PARTE: 2MA-800CE - SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75”
NUEVA CON GARANTIA
Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid.
European quality made to last!
4 HP, 2800 RPM motor
400 mm (15.75") Blade diameter capacity (Not included)
30 mm Arbor diameter
73.23" x 45.08" Table size
27.75" Max crosscut length on 3/4" thick material (90 deg)
0 to 40.5" Rip capacity
4.9" Max depth of cut
19.68" Max cut length at 45 deg on right side
12.20" Max cut length at 45 deg on left side
Dust chute on blade guard as well as rear of table
Machine weight: 495 Lbs.
Machine dimensions: 73" x 62" x 61" T
Voltage: 230V 3-Phase
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...
AMXmachinery
PART: 12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI
PART:
12533-E - DOUBLE TABLE SLOT MORTISER - BALESTRINI
USED
- CHECKED AND CLEANEDModel:
MicronMax
oscillation length: 120mm (4.8")Max
slot depth: 80mm (3.2")Max
slot thickness: 30mm (1.2")Hourly
production: 500-800 slotsSpindle
rotation: 9,000 RPMOscillations
per min.: 60-350Max
table inclination: 20 degreesTables
19" x 9"Pneumatic
holddown on each tableSpindle
motor: 3HPOscillation
motor: 1/2HP
Current
Voltage: 220v
-500x500.jpeg)
AMXmachinery
ARMADORA Y APILADORA DE TARIMAS – INCLUYE 3 CLAVADORAS – RAYCO INDUSTRIES
PARTE: 12008 – ARMADORA Y APILADORA DE TARIMAS – INCLUYE 3 CLAVADORAS – RAYCO INDUSTRIESUsadaRayco Industries, Inc.440V, 3 fasesOcupa un espacio de 5 x 5 metros aproximadamente3 clavadoras, Apilador y racks de salida incluidasVIDEO https://vimeo.com/389375899
AMXmachinery
PARTE: 1SIL-DC-FURM-70 – BASTONERA – MOTOR 5 HP - CAPACIDAD DE 1/2” - 2”
PARTE: 1SIL-DC-FURM-70 – BASTONERA –
MOTOR 5 HP - CAPACIDAD DE 1/2” - 2”BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Nueva con garantiaCapacidad: Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: ...