Identificador: 1541
Abierta
Descripción
PARTE: 2MA-640CE - SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIA
Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid.
European quality made to last!
4 HP for 3-Phase Option, 3 HP for Single Phase Option, 2800 RPM motor
400 mm (15.75") Blade diameter (not included)
62.20" x 38.39" Table size
21.5" Max crosscut length on 3/4" thick material
0 to 33.8" Rip capacity
4.9" Max depth of cut
15" Max cut length at 45 deg. On right side
7.5" Max cut length at 45 deg. On left side
Dust chute on blade guard as well as rear of table
Machine weight: 447 Lbs.
Machine dimensions: 62" x 55" x 61" T
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
LIJADORA DE BANDA ANCHA - 52” ANCHO - 3 LIJAS - TIMESAVERS
PARTE: 12294 - LIJADORA DE BANDA ANCHA - 52”
ANCHO - 3 LIJAS - TIMESAVERS
USADA BUENAS CONDICIONES
460/60/3 electrics
AMXmachinery
PARTE: 12542 - SIERRA MULTIPLE - 30 HP - GABBIANI
PARTE:
12542 - SIERRA MULTIPLE - 30 HP - GABBIANI
USADA - MUY BUENAS CONDICIONES
CAPACIDAD 300 MM
CADENA EN MUY BUENAS CONDICIONES
-500x500.png)
AMXmachinery
TROMPO CON ALIMENTADOR CNC
PARTE # 2AM-540 - TROMPO CON ALIMENTADOR INTEGRADO - CNC - PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5hp 208-230v 3phShaper Speed: 4000 to 7000 rpmSpindle Size: 1 1/4"Feed Speed: Variable to 30 fpmConveyor: 6" wideMax. Part Thickness: 2"Floor Space: 55"w X 38"dPlantilla Centradora para curvas - opcionalNew CNC controlled Model 540 shaper is based on the Model 390 - a proven, reliable workhorse for over 10 years. The 540 was designed to machine arched panels and rails for cabinet...