ID: 2353
Open
Description
SIERRA MULTIPL PARA CORTE DELGADO 2CK-MRS12
- The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Powered Rise & Fall to the pressure rollers
- New style round Fence Bar support with quick shift long fence
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow speed start) and low voltage controls
- C.E style European guard & safety features
- Long fence for control of long material
- Automatic star-delta starter (slow soft-low amperage start) and low voltage controls
- Electrics to 230/460 or575 volts 3 phase 60 cycles – as required to UL/CSA Standards
- With 3 rubber coated hold down rollers at outfeed end of machine
- Overload protection device – Feed speed will slow down automatically if saw motor becomes overloaded
|
Maximum working thickness |
3 3/8” (85mm) with standard pressure shoe *2 ¾” (70mm) with short stock attachment: |
|
Minimum Length |
12” with short stock attachment |
|
Saw Sleeve Usable Length |
|
|
(between outside saws) |
12″ (305 mm) |
|
Sawblade Dia. |
200 to 305mm (8” to 12”) |
|
Saw arbor Sleeve OD (Diameter) |
70 mm |
|
Saw arbor diameter |
50 mm |
|
Saw arbor vertical adjustment |
3.6” (90 mm) |
|
Saw Motor HP |
60 HP 460 volt |
|
Powered Pressure Rollers(Rise/Fall) |
½ HP motor |
|
Saw Arbor Speed |
3800 RPM |
|
Feed Speeds |
25 – 100 FPM |
|
Feed Motor HP |
3 or 5 HP |
|
Voltage |
Machine can be ordered
230,460, |
|
Table Size |
30” x 60″ |
|
Table Height from floor |
33.5″ |
|
Net Weight |
4510 lbs. |
|
Shipping Weight |
5060 lbs. |
|
Machine Dimensions |
82.68” 59” x 56 ½” |
|
Shipping dimensions |
70.87” x 66.93” x 63” |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachinery1
SIERRA DE PANELES AUTOMATICA
PARTE: 2CK-TPS-SH - SIERRA DE PANELES AUTOMATICA Production panel sizing solution for the small to mid-sized manufacturer. The industrial machine design combined with user friendly PC control interface ensure accurately dimensions sheet components with a chip free finish. Available in 8’, 10’, 12’ with front loading. The powerful 18HP saw motor and carriage runs on two round hardened guide rails on (8) copper wheels. The saw carriage cutting speed is variably adjusted according to ...
-500x500.jpg)
AMXmachinery1
SIERRA SE VAIVEN - 300 MM
PARTE: 2CK-FR-300 - SIERRA SE VAIVENFEED ROLLS & PRESSURE ROLLSBottom Rolls – 7 pieces in Front Section & 5 pieces in Rear SectionTop Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensorTop Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
Motor
20 HP +1/2 HP + 5kW(Servo) + 2HP
Blower
Max.
Working Thickness
310 mm
Min.
Working Thickness...
AMXmachinery1
ESTACION DE CORTE Y BARRENADO
ESTACION DE CORTE Y BARRENADO• Precise cutting to length• Drilling 2 sides: (left and right side)• Doweling (left and right side)• Drilling from the top and underneath• Dividing and grooving• Cleaning and return transport to the operatorThis line is well suited for processing of plinths,drawers and similar items, that are used in the kitchenand furniture industry.Length:250 – 2200 mmHeight:10 – 80 mmWidth:25 – 250 mm
AMXmachinery1
CEPILLO 1 CARA - 24 PULGADAS
PARTE: 2CK-P630HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...