Identificador: 1791
Abierta
Descripción
PARTE: 2CK-SYC300
Has been designed to ensure uncompromised results specifically aimed to the company looking to run strip materials like lath, dunnage, stakes, and more. The roll feed design will rip for maximum material yield which helps increase output and margins.
- Roll feed design achieves maximum yield from the material
- Heavy frame ensures smooth running to allow thin cutting of materials like lath
- Full width top and bottom driven feed rolls assist in smooth feeding of a range of materials thru the ripsaw
- Fully enclosed design, along with multiple anti kickbacks ensure a safe operating machine
- Bottom cutting with known safety advantages
- Outboard spindle bearing support for precision cutting results
- Available in a wide range of widths and configurations to suit any applications and budget
KEY ADVANTAGES
- Heavy cast iron base provides best rigidity and reduces vibration for rip cutting results
- (6) top driven feed roll assemblies for optimum material control
- (4) bottom driven feed roll assemblies facilitate in feeding difficult to feed material
- Blades are mounted to a removable saw sleeve which allows the operator to pre-build different ripping setups and facilitates in fast changeovers
- A number of features are integrated in to the machine to ensure safe operation
|
Working widths |
12”, 16” & 18” (300, 405, & 455mm) options |
|
Working thickness |
5.1” |
|
Saws |
10” to 16” Diameter |
|
Spindle RPM |
4000 RPM (VFD control optional) |
|
Spindle diameter |
50 mm |
|
Saw sleeve diameter |
70mm OD with two keyways |
|
Standard feed speed |
20 to 100 FPM (optional to 200 or 300 FPM) |
|
Minimum part length |
10″ at slower speeds |
|
Main Motor |
50, 75, 100, 150 HP options |
|
Feed motor |
5, 7.5, 10, 15, or 20 HP |
OPTIONS
- Variable frequency drives for spindle: allow RPM of spindles to be varied and act as a fully electronic braking system.
- Range of spindle horse powers available
- Range of feed speeds available
- Amp Meter
- Zero Sensing system to ensure spindle has stopped (interlocked with door)
- Range of infeeds available
- Range of outfeeds available
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ROLADORA 50'' x 14Ga
ROLADORA 50'' x 14Ga PARTE: 2GM-PSR-5014E-1PHPower Bending roll up/down with push buttonThis machine has a 2 HP Motor, rated at 220V, Single Phase. Min. roll bending dia.capacity 3.5" ISO 9001 certifiedBending roll is powered up/down with push button and LED display for repeat jobs and can make cone parts.One handle to control pinch roll up/down, more convenient and efficiencyHeavy welded all steel construction for maximum rigiditySilence electrical motorQuick release top roll...
AMXmachinery1
EXTRACTOR VENTILADOR TUBOAXIAL CON BASE
PARTE: 1AM - EXTRACTOR VENTILADOR TUBOAXIAL CON BASEPara uso de ventilación directa sobre maquinarias, motores, operadores, zonas de trabajo, secadores, fundiciones, etc.Carcasa tubular fabricada en acero al carbón con aplicación de pintura electrostática y horneada. Rejilla de protección electro soldada. Hélice de aluminio anti-chispa.Características:– Aspa con diámetros de 16,20, 24 y 26″.– Volúmenes de aire desde 4,200 hasta 18,725 PCM.Usos:– Ventilación directa sobre maquin...
AMXmachinery1
PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3 CARAS
PARTE: 2CK-LBS300-5S - LIJADORA DE MOLDURAS - 3
CARASEliminate hand sanding with our economical
sanding and de-nibbing solution for linear profileDesigned to help with your everyday linear profile sanding needs. It can be used for white wood sanding and sealer sanding of linear parts such as mouldings, flooring, furniture components, window parts etc. The machine works well as a standalone unit, or as part of the finishing line.Designed for sanding linear profiled wood on three sidesBrushing h...
AMXmachinery1
TROMPO - MOTOR 7.5 HP
PARTE: 2CK-SS512CBIs a ruggedly built shaper with refined features well suited for demanding production environments. Its’ versatile design makes it the ideal shaping solution for edge-profiling, door & furniture components, mouldings, tenoning, and more. The powerful dual direction 7.5HP driven spindle allows for optimum shaping even with large profiles. The heavy-duty cast-iron table and shaping column ensure maximum stability with superior vibration damping for optimum finish quality....