Identificador: 1787
Abierta
Descripción
PARTE: 2CK-MRS340M
The motorized moving blade system is designed to provide you with maximum flexibility in your ripping operations to achieve the maximum yield from your material. The touch screen control allows the operator to pre-set the blades position(s) or jog the blades to achieve the desired ripping result. Each moving blade is controlled by a servo motor and is adjusted using a ball screw and linear guideway for the highest accuracy. The blade position is indicated with a laser projection line so the operator can visualize the cutting line to increase efficiencies. If you are looking to increase material yield and add flexibility to your ripping operations the MRS340M series is the ideal choice.
- 1 or 2 moving blades for maximum flexibility to achieve optimal yield
- Powerful 50HP main saw motor (Optional 60 or 75 HP)
- Variable speed feed by frequency inverter with electronic overloading system to automatically reduce the feed speed when drawing too much load
- Maximum 13.4” with between outside saws
- Touch screen operator control can store up to 10-programs with 10-settings in each
- Joystick is used to control the position of the blade
- Maximum 14” saw blades for a cutting thickness up to 4”
KEY ADVANTAGES
- Automatic mechanical lubricator for provide consistent lubrication to the chain track for maximum wear resistance
- Insert type chain track with either replaceable steel or rubber inserts
- Fixed and moving lasers which are tied to the moving blades for projecting the cutting line
- (4) rows of safety anti-kickback fingers
- Powered outfeed roll to evacuate ripped material from the machine
- Pneumatic top pressure rolls for optimum control over the material resulting in accurate cutting
- Precision high-quality cast-iron chain & track assembly for straight line cutting and maximum durability
|
Max. cutting thickness |
2.95″ (75mm) with 12”x3.4mm standard blade |
|
3.93″ (100mm) with 14″x3.4mm optional blade |
|
|
Max. cutting width |
13.4″ (340mm) |
|
Max. material width |
20.67″ (525mm) |
|
Min. material length |
21.7″ (550mm) |
|
Max. sawblade diameter |
14″ (355mm) |
|
Min. sawblade diameter |
12″ (305mm) |
|
Sawblade bore |
Ø90 mm |
|
Saw arbor diameter |
Ø70 mm (2.8″) |
|
Saw arbor speed
|
4500 RPM with 12” standard blade |
|
3800 RPM with 14” optional blade |
|
|
Thickness adjustment motor |
0.5 HP |
|
Saw arbor motor |
50 HP – Standard (60 or 75HP optional) |
|
Feed motor |
3 HP |
|
Variable feed speed |
16~131 FPM (5-40 M/min) |
|
Dust hood dia. |
(1) 8″ x (1) 4″ |
|
Table height from floor (H) |
33.46” (850mm) |
|
Table area (L x W) |
60″ x 23.4″ (1525 x 595mm) |
|
Compressed air requirement |
80~90 PSI |
|
Machine weight (NW / GW) |
4840 lbs. / 5170 lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 3 SIERRAS MOVIBLES
PARTE: 2CK-MRS450MFEATURESThe Main Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stabilityHD Precision Straight Line Feeding caterpillar Chain typeFeed Chain with easily Replaceable bolt in Cast Steel or Urethane Pads – optionalFully Programmable Position sets (10 programs of 10 sets each) or Infinitely variable foot pedal position set.User friendly Touch Screen control (free standing operators control console) is integrated with a 32 bit micro process or...
AMXmachinery1
SIERRA CINTA 24" - 3HP
SIERRA CINTA 24" - 3HP 2CK-HB600RIncorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design...
-500x500.png)
AMXmachinery1
CIERRA CINTA 37" 2 EN 1
CIERRA CINTA 37" 2 EN 1 PARTE:2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also b...
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 7 RUEDAS - PIEZAS CORTAS
PARTE: 2CK-DC70For woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.Ideal for feeding of short material7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)Universal stand allows the operator to change the feeder for vertical to horizontal feeding direction or angles as desi...