Identificador: 1793
Abierta
Descripción
PARTE: 2CK-MRS350
FEATURES
- The Frame is cast iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with Heavy Guided Chain. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel 55mm dia. Saw Arbor with 70 mm OD with dble. keyed Quick Removal Sleeve
- Powered Rise & Fall to the Pressure Rollers
- New style round Fence Bar support with Quick-Shift Long Fence
- Long Infeed Fence with Heavy Round Bar for mounting for control of long material (not shown in picture above)
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow-soft speed start) and low voltage controls
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Overload Protection System for feed motor. The feed chain slows down automatically when the saws are overloaded. This prevents damage to the material and machine. It also prolongs saw life.
- Comes with 1 set of spacers and removable saw sleeve
- C.E style European Guard & Safety Features
- Electrics are 230, 460 or 575 Volts 3 phase 60 cycles to UL/CSA Standards
|
Maximum working Thickness |
5.3” (135mm) with 16” Saws |
|
Maximum Distance between Outside Saws |
13.78” (350mm) |
|
Distance from column to link chain center |
14.961” (380mm) |
|
Minimum length to cut – standard |
25.591” (650mm) (to 19.7”-500mm w/Short Stock holdown–option) |
|
Max. Saw Blade Diameter |
16” (380mm) |
|
Min. saw Blade Diameter |
10” (250mm) |
|
Sawblade bore |
70mm – double keyed |
|
Saw Arbor Diameter |
55mm |
|
Saw Arbor Motors Available |
50 HP (Std) , 60HP or 75HP or 100HP – Optional |
|
Saw Arbor Speed |
3800 RPM (50/60 HP); 3000 RPM (75/100HP) |
|
Variable Feed Speeds |
24~100 FPM (7.5 ~ 30 m/min) |
|
Feed Motor |
2HP std. (3HP optional for extra heavy cutting) |
|
Power rise/fall to pressure rollers |
1HP |
|
Table height from floor |
29.33” (745mm) |
|
Table size |
72” x 31.5” (1840mm x 800mm) |
|
Machine dimensions |
92” x 61” x 59” (2340x1550x1510mm) |
|
Machine Weight |
5280 lbs. (2400 kgs.) |
|
Voltage – to UL/CSA Standards |
available 230, 460 or 575/3/60 (please specify) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA ESCUADRADORA - 10 PIES
PARTE: 2CK-D405AIs the ideal sliding panel saw for high accuracy cutting of sheet materials to produce kitchen cabinetry, furniture, millwork operations, and more. This is our most industrial saw with manual setting rip fence. The 10’ sliding table is made from a precision aluminum extrusion and runs on precision linear guide rails. It has motorized rise/fall and tilt of the blades.Motorized blade height & tilt adjustment with a digital angle readoutPrecision sliding table runs on hardened...
AMXmachinery1
SIERRA RADIAL - JUNIOR 800CE
PARTE: 2JG-MAG-BIG800CE - SIERRA RADIAL - JUNIOR 800CEOffer adaptability, versatility, precision and durability to shops of all sizes. Maggi has been producing radial arm saws since 1973 and over the years has continually improved technical design and quality. Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity (Not included)30 mm Arbor diameter73.23" x 45.08" ...
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
AMXmachinery1
DOBLADORA DE METAL 5' X 10GA
DOBLADORA DE METAL 5' X 10GA PARTE: 2GM-0510EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...