ID: 1798
Open
Description
PARTE: 2CK-C12RSH
Is a single-blade ripsaw geared towards the shop looking to increase efficiency in their ripping operations but can not justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the C12RSH can produce a glue joint finish ready for panel glue-up right out of the saw.
- Produces a guaranteed glue joint finish to 10′, which eliminates the need to joint the material after ripping
- Precision straight line feeding for parallel and accurate rip cuts
- Eight hold down rollers over six rows ensure material is firmly held during cutting operations for a longer period resulting in a straighter, more precise cut.
- Maintenance-free chain track with the use of a reliable mechanical lubrication system.
KEY ADVANTAGES
- Cast iron saw assembly, column, and table with superior vibration damping properties for optimum cutting results while ensuring long bearing and machine life.
- Rigid machine body consists of a thick welded steel frame.
- FC35 cast iron chain track with double-V design ensures precision straight-line ripping with a long wear life.
- Precision Built Saw Arbor constructed of nickel-chrome steel, large diameter, accurately ground and dynamically balanced.
- Arbor runs in precision angular contact type ball bearings (eliminates any radial run-out & axial thrust) – V Belt driven from below.
- Mechanical operation Chain Oiler provides consistent lubrication to the chain track and automatically adjusts to your feed speed.
- When oil runs low, a warning light will come on, and when it gets too low, the machine track stops running to avoid damage to the track.
- Cast iron rip fence is mounted to a large diameter round guide rail with a quick-locking lever for effortless and accurate adjustment.
- 3 sets of anti-kickback fingers. 2 top and 1 set in the table for added operator safety.
- Soft start – Star Delta starter reduces the amp draw on startup.
- Optional laser light to project the cutting line to achieve maximum material yield.
|
Saw arbor diameter |
1″ |
|
Saw blade diameter |
10 – 12″ |
|
Saw arbor speed |
4500 rpm |
|
Feed Speeds – variable |
50 to 120 FPM |
|
Maximum workpiece thickness |
3.34″ (12″ blade) |
|
Minimum workpiece length |
8″ |
|
Glue line guarantee |
10’ (+/- 0.0098” or 0.25mm) |
|
Distance between saw and column |
18″ |
|
Arbor motor |
15 HP |
|
Feed motor |
1 HP |
|
Electrical |
46 amps (230V); 23 amps (460V) |
|
Table size |
39″ x 57″ |
|
Table height |
31-7/8″ |
|
Dust port size |
4″ |
|
Net weight |
2,090 lbs |
|
Machine dimensions |
68” x 46” x 62” |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...
AMXmachinery1
SIERRA MULTIPLE - 2 SIERRAS MOVIBLES
PARTE: 2CK-MRS340MThe motorized moving blade system is designed to provide you with maximum flexibility in your ripping operations to achieve the maximum yield from your material. The touch screen control allows the operator to pre-set the blades position(s) or jog the blades to achieve the desired ripping result. Each moving blade is controlled by a servo motor and is adjusted using a ball screw and linear guideway for the highest accuracy. The blade position is indicated with a laser...
AMXmachinery1
ENCHAPADORA DE CANTOS - 230V, 1-3 FASES
PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...
AMXmachinery1
PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO
PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO
Nueva con garantía Designed for water-based woodworking glues.Glue is applied to the bottom edge of the stock when the stock is passed by hand across the roll.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The high-quality 6" diameter, 12" wide grooved rubber roll for durability usage.Removable stainless steel glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Floor stand, air re...