ID: 2026
Open
Description
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONS
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”, 2-1/2", 3". Angúlo máximo 30°
AMXmachinery
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 2 NIVELES
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 2 NIVELESHornos Secadores para Chapa Natural de MaderasNueva con garantíaOperación- Manual- Semi Automático- Completamente AutomáticoLínea Secado Horizontal- Características- Horizontal air circulation with vertical air blowing- Variable Frecuency DriveLínea de Sacado Vertical- Características - Vertical design - Energy saving - Small space - Economic Price - Less labor cost - High drying efficiency - Low operational costsFuentes ...
AMXmachinery
PARTE: 12577 – CHAFLANADORA - HAZELDINE
PARTE: 12577 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES
AMXmachinery
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTO
PARTE: 12615 - REASERRADORA HORIZONTAL - 1 BANDA – 16” ANCHO X 12” ALTOUsada - Excelentes condiciones - Solo 50 horas de usoWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide x 12" high cant capacityCurrently just under 50 hours of use