Identificador: 2026
Abierta
Descripción
PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD
USADA – MUY BUENAS CONDICIONES
3 HP TEFC Dual Voltage Motors
Wired for 460 Volt, 3 Phase
Start and E-Stop buttons
Left head fixed, Right head manually position via hand crank
Minimum Cut Length @ 90 = 13”
Maximum cut length @ 90 = 100”
Both heads rotate inward 90 to 45 degree
Both heads tilt outward to 45 degree for compound
Two hand anti tie down cycle control on pedestal
Built in 3rd party hydro-check
Pneumatic filter/regulator
Pneumatic flow control for head operation
Pre-arranged for horizontal and vertical clamps with footpedal
2 @ 12” Carbide tipped saw blades
SIKO electronic digital readout with magnetic encoder
Two center work supports
Very Good condition, cleaned and checked
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA DE MESA 10"
PARTE # SIL-DC-MBS250-1 - SIERRA DE MESA 10" - MOTOR 5 HP - 220V, 1 FASEPARTE # SIL-DC-MBS250-3 - SIERRA DE MESA 10" - MOTOR 5 HP - 220V, 3 FASENUEVA CON GARANTIA MOTOR: 5 HP, 220V, 60 Hz, 1 y 3 FASESDIAMETRO DEL DISCO 10"CAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 3"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4200 RPMMEDIDAS DE LA MESA: 36" X 27"ALTURA MESA: 33-1/2"MAXIMO CORTE A LA DERECHA DEL DISCO: 25"PESO: 225 KGSTIPO DE EMPAQUE: 2 CAJAS
AMXmachinery
EXTRACTOR SOPLADOR DIRECTO
PARTE: 1AM - EXTRACTOR SOPLADOR DIRECTO
Modelo
HP
Volumen
PCM MC/HR
12AI-XTAD-16
1/2
4,200
7,136
12AI-XTAD-20
3/4
8,170
13,880
12AI-XTAD-24
1 1/2
14,530
24,686
12AI-XTAD-26
2
18,725
31,814
AMXmachinery
LIJADORA DE TAMBOR 37"
PARTE # 2SM-937003 - LIJADORA DE 2 TAMBORES - 37" DE ANCHO – 5 HP, 220V, 1 FASEPARTE # 2SM-937103 - LIJADORA DE 2 TAMBORES - 37" DE ANCHO – 5 HP, 220V, 3 FASESSPECIFICATIONSSanding Capacity:Maximum Width (in): 25, 37, 50Minimum Length (in): 3-1/2Maximum Thickness (in): 25″ model: 637″ & 50″ models: 12Minimum Thickness (in): 1/32Dimensions HxWxD (in):25″ model: 43 x 46 x 3137″ model: 43 x 58 x 3150″ model: 50 x 71 x 31Drum (in): (extruded aluminum)25″ model: 5 x 2537″ model:...
AMXmachinery
PRENSA ARMADORA DE SILLAS
PARTE:
3YC-YC-3R - PRENSA ARMADORA DE SILLAS
Nueva con garantía
Master
pump motor power: 5 HP
Oil
capacity of master pump: 80 Litres
3
master cylinders: Ø60x80
Max.
inclination of working planes: 30°
Useful
working dimensions: 1350x780 mm
Production:
60 to 180 pcs/h
Total
horsepower: 5 HP
Working
air pressure: 6 kg/cm²
Machine
dimensions (LxWxH): 2100 x 1800 x 1000 mm
Packing
dimensions (LxWxH): 2250 x 2020 x 1210 mm
Net
weight / Gross weight...