Identificador: 1655
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: AMX-10073 - SIERRA ESCUADRADORA VERTICAL - HOLZ-HER 1265 SUPER CUT
USADA - MUY BUENAS CONDICIONES
MOTOR: 4 HP (3KW) 220V, 3 FASES, 60 HZ
1 SIERRA CIRCULAR INSTALADA DE 8.25" DIAMETRO
NAVAJA INCISORA
MEDIDAS MESA: LARGO 5.10 M X ALTO 2.25 M X ANCHO .90 M
PESO: 1500 LBS
MFG: 2000
MANUAL EN ARCHIVO PDF
Ya está en tarima para envío:
Tarima = 514 cm largo x 150 cm ancho x 235 cm alto – 800 kg
Video1: https://vimeo.com/689549580
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
OVER ARM ROUTER
PARTE # EV-2470 - OVER ARM ROUTER - EVANS 2470- 110 Volt- Standard Features:- 3 HP router motor- 80 PSI Required- 21,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Lateral adjustment of pneumatic clamps.- Crated weight 1010 LBS. Shipping dimensions 69" depth X 72" wide X 85" high
AMXmachinery
PARTE: 12647 - SIERRA OPTIMIZADORA - WEINIG / DIMTER - OPTICUT 450
PARTE: 12647 - SIERRA OPTIMIZADORA
- WEINIG / DIMTER - OPTICUT 450
Usada - Buenas condiciones
Capacidad ancho: 12”
Mas información próximamente
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
PARTE:
2TA-CS- 20RL45 – SIERRA TRONZADORA DE 45 A 90 GRADOS AJUSTABLE – DISCO 20”
NUEVA
CON GARANTIA
Features:
Adjustable
maximum 45 degree to the right or left or 90 degree angle setting for
semi-automatic, fast cutting.
Semi-automatic
by pneumatic movement cutting.
Auto.
cutting cycle simply operated by foot switch.
Sealed
long-life ball bearings.
Full 10
HP motor for powerful cutting capacity.
Precision
ground cast iron table with heavy metal cabinet st...