Identificador: 1672
Abierta
Descripción
PARTE: 2CK-FR-200 - SIERRA DE VAIVEN
FEED ROLLS & PRESSURE ROLLS
- Bottom Rolls – 7 pieces in Front Section & 5 pieces in Rear Section
- Top Front section is equipped with 7 pressure rollers & 3 air cylinders controlled by sensor
- Top Rear section is equipped with 5 pressure rollers & 1 air cylinder controlled by sensor
|
Motor
|
20 HP +1/2 HP + 5kW(Servo) + 2HP Blower |
|
Max. Working Thickness
|
200 mm |
|
Min. Working Thickness
|
60 mm |
|
Max. Working Length
|
150 mm |
|
Min. Working Length
|
300 mm |
|
Feed Speed
|
0.1-2.0 m/min |
|
Main Shaft Speed
|
480 RPM, stroke distance 210 mm |
|
Saw blade Size
|
500 x 40 x 0.8 mm, Kerf: 1.2 mm, Pitch: 15, Stellite |
|
Max Saw Blades
|
24 pieces |
|
Finished Tolerance Value
|
±0.1 mm |
|
Min Precision Thickness
|
2 mm |
|
Dust Pipe
|
5“ x 4 pieces |
|
Machine Dimensions
|
L3800 x W1000 x H1900 mm |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - 5 RUEDAS - CON BANDA
PARTE: 2CK-AF04Is specifically designed for feeding small workpieces which can not be fed properly using a conventional 3 and 4 roller feeders. The (3) synthetic rubber belts run on (5) feeder wheels which are closely coupled together. The result is the workpiece is held between the rollers allowing for the feeding of short and/or small material. The universal stand allows you to easily adjust the height and position of the feeder. It can also be positioned from a horizontal to vertica...
AMXmachinery1
ENLAZADORA - MANUAL
PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...
AMXmachinery1
CEPILLO 2 CARAS - 40 PULGADAS
PARTE: 2CK-GTM120WHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head. This wide planer is ideal for increasing production on narrow boards and capable of planning live edge slabs...
AMXmachinery1
COLECTOR DE ASERRIN – DE BOLSAS – USO RUDO
PARTE: 2AC-TLM-162-10 - COLECTOR DE ASERRIN – DE BOLSAS – USO RUDO
NUEVO CON GARANTIA• 162-Bag High-Efficiency• Includes (162) 10’ 16 oz. polyester
snap-band bag filters rated for up to 300°F• Total Filter Area: 2,545 ft2• Air-to-Media Ratio @ 15,000 cfm:
5.89:1• Top Door, Clean-Side Filter
Access – no confined space required• Solid Welded Main Filter
Housing/Heavy Duty 7 and 10 gauge construction• Automatic Venturi-Assisted
Pulse-Jet Filter Cleaning System• Dwye...