Identificador: 330
Abierta
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12620 - SIERRA ESCUADRADORA VERTICAL – HOLZHER 1255
PARTE: 12620 - SIERRA ESCUADRADORA VERTICAL – HOLZHER 1255USADA – BUENAS CONDICIONESCORTA HORIZONTAL Y VERTICALLONGITUD MAXIMA DE CORTE: 4400 MMALTURA MAXIMA DE CORTE: 2000 MMESPESOR MAXIMO DEL TABLERO: 63 MMDIAMETRO HOJA SIERRA: 250 MMFLECHA HOJA SIERRA: 30 MMMOTOR: 4 KWDIMENSIONES DE TRANSPORTE: 5200 MM LARGO X 1200 MM ANCHO X 2800 MM ALTO
AMXmachinery
TORNO GENINI - MINIAUTOMAT
PARTE # 10395 - TORNO GENINI - MINIAUTOMATUSADO - EN MUY BUENAS CONDICIONES DE OPERACIONTOTALMENTE AUTOMATICOTIENE 5 FUNCIONES DE CORTECAPACIDAD MAXIMA DE TRABAJO: HASTA 10 CMS DIAMETRO Y 15 CMS LARGOALIMENTADOR AUTOMATICOTIENE LUNETAS PARA DE 1 A 10 CM, 10 JUEGOS DE LUNETAS CON CAMPANA APROX.LA HERRAMIENTA INCLUIDA TINE UN VALOR SIMILAR AL DEL MISMO TORNOLA VELOCIDAD DE OPERACION PROMEDIO ES DE 4 A 5 PIEZAS/MINMOTOR 7.5 HP, 220V, 3 FASESTIENE MUCHA HERRAMIENTA PARA HACER 50 PIEZAS DIFERENTESMA...
AMXmachinery
PARTE: 12387 - COLECTOR DE ASERRIN - DONALDSON TORIT
PARTE:
12387 - COLECTOR DE ASERRIN - DONALDSON TORIT
USADO - BUENAS CONDICIONESThe dust collector Filter Area
has an estimated up to 8,128 sq.ft. of filtration surface area with (32)
cartridge filters, estimated 8,100-20,300 cfm, 16 valves, a square design with
a rotary airlock discharge. Disassembled parts overall sizes: Dust
Collector-Overall Size 88"W (with fittings) x 84"D x 118"H (with
fittings), Legs Overall Size 86"W x 185"H, Manifold Overall Size
80"W x 19"D x 35"H, Pyrami...
AMXmachinery
MAQUINA BALANCEADORA - EQUILIBRADO - MOTORES
PARTE:
3JP-PHQ-160H - MAQUINA BALANCEADORA - EQUILIBRADO - MOTORESMAQUINA BALANCEADORA DE EQUILIBRADO DE TRANSMISION POR CORREACon sistema de medición por computadora JP-580Nueva con garantía• Uso de la máquina El cuerpo de la
máquina de hierro fundido puede utilizarse durante muchos años.• Combinado con un sistema de control de
computadora industrial de 17 pulgadas y pantalla LCD.• Impresora láser combinada gratuita, para
que pueda imprimir el informe de pruebas de balanceo.•...