Identificador: 330
Abierta
Descripción
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICA
An Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in Italy
As compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !
Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets.
Occupies about the same footprint as a sliding table saw but doesn't require valuable floor space in front or behind like a sliding table saw does.
Side-by-side comparison proved Concept 350 can be up to 3x more productive than a slider.
Extremely easy to use ... and there is no complicated programming to learn.
Sizes panels accurately and chip free with a very unique single blade scoring function.
Bevel cutting of 0-46 degrees is possible with the standard electronically controlled blade tilt.
The large diameter blade in conjunction with the massive pressure beam allows the operator the ability to safely stack or book cut multiple panels.
The 300 - 350 mm blade is completely enclosed during the entire cutting cycle thus insuring operator safety.
Video de la maquina funcionando: VIDEO 1
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...
AMXmachinery
ENGOMADORA 2 LADOS 63” - 4 RODILLOS - BLACK BROTHERS
PARTE:
12303 - ENGOMADORA 2 LADOS 63” - 4 RODILLOS - BLACK BROTHERS
USADA - BUENAS CONDICIONES230/460V, 3 PHASE - CONECTADA A 230V ACTUALMENTE
-500x500.jpg)
AMXmachinery
SECANTE MADERA 8,000 PT
SECANTES DE MADERA ASERRADAPARTE # 1SE-004-M - Secante 4,000 pies tabla - dimensiones: frente 6m x fondo 3m x alto 3mPARTE # 1SE-006-M - Secante 6,000 pies tabla - dimensiones: frente 6m x fondo 4m x alto 3mPARTE # 1SE-008-M - Secante 8,000 pies tabla - dimensiones: frente 6m x fondo 6m x alto 3mPARTE # 1SE-015-M - Secante 15,000 pies tabla - dimensiones: frente 6m x fondo 9m x alto 3mNuevos con garantiaCaracteristicas del secante:Es secante e inmunizadorDesarmableSe puede construir en diferente...
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI