Identificador: 1227
Abierta
Descripción
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel Diameter: 36"
Max. Bandsaw Width: 100mm
Maximum Depth of Cut: 370mm
Saw Motor: 20 HP, 230/460v, 3ph
Feed Motor: 0.55 HP, 230/460v, 3ph
Feed Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ROUTER CNC - MODEL K
PART # 2TA-K-0404TN - ROUTER CNC - MESA 4' X 4' - MOTOR 3 HP - SIN MESA DE VACIOPART # 2TA-K-0404 - ROUTER CNC - MESA 4' X 4' - MOTOR 3 HP - CON MESA DE VACIOPART # 2TA-K-0408 - ROUTER CNC - MESA 4' X 8' - MOTOR 3 HP - CON MESA DE VACIOPC base CNC controller is set up to accept standard G code programming formats along with on board conversational applications.User friendly IC 2009 powerful closed positioning loop software with Ethernet interface for data transfer from PC.All axis are driven by ...
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachinery
TORNO DE DESENROLLO
PARTE # 11856 – TORNO DE DESENROLLO – CAPACIDAD 2700 MM LARGOMarca: R.F.R. Modelo: 16P26Año: 1978Condicion: usadoHecho en AustriaDiametro Maximo de tronco: 1600 mmLargo maximo de tronco: 2700 mm
AMXmachinery
TROMPO/PULIDOR CON ALIMENTADOR
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVASShaper Motor: 7.5 HP Belt DrivenShaper Spindle Speed: 4000-7000 rpmShaper Spindle: 1-¼" Dia.Sander Motors: 1.5 HP Direct DriveSander Spindle Speed: 400-1800 rpmSander Spindles: 1" Dia. by 4" TallVoltage: 208-240V 3ph, 30A208-240V 1ph, 40A440V 3ph, 15AConveyor: 6" Wide, 4 rows of tiresVertical Adjustment: Yes, with digital countersHorizontal Adjustment: Yes, with digital countersSand...