Identificador: 2333
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
SIERRA CINTA 20" - 3HP 2CK-HB500R
Incorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenance.
- Heavy gauge steel frame ensures stable and vibration free cutting
- Cast iron top & bottom wheels are precision machined and dynamically balanced
- Saw wheels are laminated with rubber for accurate blade tracking
- Table tilts to 45° for bevel cuts
- Upper and lower bearing guide assemblies for optimum blade control
- Standard equipment includes: Rip Fence, & Mitre Gauge
- Rack & pinion guide adjustment
- Table is made of cast iron and surface is precision machines for flatness
- Convenient blade tension adjustment by a handwheel
- Foot brake for quick stopping of the blade
|
Saw wheel diameter |
20″ |
|
Motor |
3HP |
|
Table size |
26 ¾” x 20 ½” |
|
Table tilting |
0 – 45 o |
|
Throat capacity |
18 ¾” |
|
Height capacity under guide |
11-7/8″ |
|
Width of wheel |
1.38″ (35mm) |
|
Blade speed |
4450 FPM |
|
Blade length |
156 ¼” ~ 157 ½” |
|
Blade width |
¼” ~ 1 ¼” |
|
Dust hood dia. |
4″ |
|
Net weight |
616 lbs. |
|
Shipping weight |
770 lbs. |
|
Machine dimensions |
38.2″ x 27 ½” x 74″ |
|
Shipping dimensions |
77 ½” x 22.8″ x 39 ¾” |
|
Electrical |
230/1/60 = 17 Full Load Amps |
|
230/3/60 = 9.6 Full Load Amp |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...
-500x500.jpg)
AMXmachinery1
MOLDURADORA - 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
PARTE: 2CK- LMC-518S - MOLDURADORA
- 5 CABEZALES - 7” ANCHO - LEADERMAC LMC 518S SMARTMAC
SPECIFICATIONS
Thickness of material
.4”(to ¼” optional) to 5”
Width of material
.6” to 7” (8” optional)
Min lenght of material
8” (butt fed)
Axial Adjust (side heads)
.8” (20 mm)
Axial Adjust
(top/btm heads)
.8” (20
m...
-500x500.png)
AMXmachinery1
ENGANCHADORA CON CONTROLADOR NC
ENGANCHADORA CON CONTROLADOR NC PARTE: 2GM-HBB-1010NCISO 9001 certified Meet OSHA and CE safety standard48” NC table back gauge with fingers Max. 16 bends per program Upto 100 Program Storage Programmable Angle/ Angle Correct NC ram height control for open hemming Hardened fingers and table Germany Rexroth hydraulic system Yaskawa Servo motors and Drives Schneider electrical components All steel construction for maximum rigidityHydraulic logic...
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...