Identificador: 1108
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100
Machine has been cleaned & checked.
240 Volt 3-Phase
Complete with dust hose & manifold
QUICKWOOD ELITE PRO 1100
* MAX WIDTH OF WORKPIECE...43"
* MAX HEIGHT OF WORKPIECE...3.9"
* MAX LENGTH OF WORKPIECE...INFINITE
* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)
* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN
* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN
* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)
* ACOUSTIC INSULATION...THIS SANDER IS EQUIPPED WITH TURBOFANS FOR HOLDING THE WORKPIECE BY MEANS OF A VACCUM AND ARE FITTED WITH CLOSED CELL FOAM SOUND DEAFENING PANELS ATTACHED TO THE BOTTOM PANELLING, IN ORDER TO REDUCE THE NOISE LEVEL.
YEAR 2006
PHASE 3 PHASE
VOLTAGE 220 VOLT
ESTIMATED DIMENSIONS 98" X 80" X 83"H
ESTIMATED WEIGHT 5,000 LBS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CORE BUILDER
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...
AMXmachinery
EXTRACTOR AXIAL DE PARED - DE 6 ASPAS - 36” DIAMETRO - AMERICAN COOLAIR
PARTE: AMX-10090 - EXTRACTOR AXIAL DE PARED - DE 6
ASPAS - 36” DIAMETRO - AMERICAN COOLAIRUSADO - EXCELENTES CONDICIONES - COMO NUEVOPOLEA Y BANDAVENTILADOR
MOTOR CERRADO DE 1 HP, 220/440V, 3
FASES, 1,750 RPMMEDIDAS TOTALES: 16" ANCHO X 44" LARGO X 44" ALTO
AMXmachinery
PARTE: 2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCION
PARTE:
2AM-U-300P - ARMADORA DE MARCOS - SEMIAUTOMATICA - PRODUCCIONNUEVA CON GARANTIACon la maquina viene incluido:(1) 7mm Nail Head(1) 10mm Nail Head(1) 12mm Nail Head(1) Single Vertical Positive Placement Clamp(1) Single Metal Pressure Plate(1) Magnetic Support for Vertical Placement
Clamp(1) Blue Rubber Pads (SW)(1) Yellow Rubber Pads (MW)(1) Black Rubber Pads (HW)(...
AMXmachinery
RESACADORA DE TARIMAS 1 RESAQUE
PARTE # NC1-1400-2 - RESACADORA PARA TARIMAS - 1 RESAQUENueva con garantiaMotor 10 HP, 220V, 3 fasesCapacidad: palos mínimo 30”, no máximoTamaño de resaque: Medida Estándar de 0 a 3” ancho x 9” largoCabezal con navajas fijas y helicoidales300 - 400 resaques por horaBotón de paro de emergenciaMedidas maquina: 48" largo x 36" fondo x 45" altoPeso aproximado: 375 KgMaquina para uso rudo industrial