ID: 2389
Open
.jpg)
Description
ROUTER DE PEDESTAL 2CK-DR750
Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”. Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.
- Precision Constructed Spindle Assembly: The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.
- 3-Position Depth Stops: A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently
- Spindle Travel: Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.
- Lubrication: Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.
- Rigid Table: The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.
- Drive Belt: Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.
- Collets Included – Double taper type: 1/4″ 3/8″, 1/2″, 5/8″. Metric sizes available as an option: 6, 9, 12mm.
- Guide Pins Included: 1/4″, 3/8″, 1/2″.
- 7.5HP Spindle Motor with magnetic switch.
- Dust cleaning air gun
- Brush ring shroud
- Fence for straight routing
- Dust Hood: 3″ diameter outlet
- Grease: One bottle spread, recommended grade SUN-742EP.
Chuck to table top maximum | 11″ (280mm) |
Throat clearance | 29-1/2″ (750mm) |
Spindle speeds (2 speeds) | 10,000 / 20,000 RPM |
Spindle travel | 3-3/4″ (95mm) |
Depth stops | 3 Position turret stops, adjustable |
Table travel | 7-1/2″ (190mm) |
Table surface area | 36″ x 40″ (915 x 1016mm) |
Table tilt | Front downward to 45degrees |
Micrometric table raise | 3/64″(1mm) per revolution of handwheel |
Collet sizes | 1/4″ 3/8″ 1/2″ 5/8″ |
Spindle drive motor | 7.5HP |
Belt size | 35 x 2330mm |
Net weight | 720kgs (1590 lbs) |
Gross weight | 900kgs (1990 lbs) |
Packing dimensions | 66″ x 44″ x 72″ (L x W x H) |
Machine electrics | 460/3/60 (11 amps) or 230/3/60 (22 amps) |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE COCINA INDUSTRIAL – ALUMINIO
2 EXTRACTORES IGUALES EN EXISTENCIA
PARTE: 12461-1 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
PARTE: 12461-2 - EXTRACTOR CENTRIFUGO - DE AIRE - DE
COCINA INDUSTRIAL – ALUMINIO
USADO – MUY BUENAS CONDICIONES
MARCA: DAYTON ELECTRIC
MODELO: 4HX98B
Base 34” X 34”
Diámetro total: 42”
Altura total: 36”
Baleros nuevos Motor y Extractor
Motor 1.5 HP, 115/230V, 1 Fase, RPM
1,725, AMP 18/9, marca BALDOR, actualmente conectado a 115VVi...
AMXmachinery1
SIERRA TRONZADORA - 18 PULGADAS - NO FERROSA
PARTE: 2CK-PCS18MIs the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful 10HP motor and adjustable cutting stroke ensure it can effortlessly cut though a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, security bolt on the saw access door, blade misting system, and solid chrome table. Available in either left ...
AMXmachinery1
LIJADORA DE BANDA ANCHA - ARRIBA Y ABAJO
PARTE: 2CK-SU/SBIs designed for in-line or stand-alone operations. Suitable for double-sided processing solid wood or sealer sanding applications is built to exacting standards to sand multiple surfaces generally in one pass to achieve outstanding results with maximum efficiency. Is available with multiple configurations with 1-4 sanding units and widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (drum/platen), or wire brush h...
AMXmachinery1
PARTE: 3AM-H-33N - SIERRA CINTA PARA METAL - CNC AUTOMATICA
PARTE: 3AM-H-33N - SIERRA CINTA PARA METAL - CNC AUTOMATICASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualVice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMain Motor(kw): 4Coolant Motor (kw): 0.75Max. Cutting Capacity(mm): Round:...