Identificador: 1706
Abierta
Descripción
PARTE: 2CK-SR750
Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a steel fence and the spindle to column clearance is 29.5”. Comes with a convenient foot pedal to actuate the router so you can keep your hands on the template.
- Precision Constructed Spindle Assembly: The massive spindle, which is ground and balanced, is mounted on super precision (GNP4 grade) ball bearings to assure high performance routing year after year. Close fit tolerance and carefully assembly to minimize thermal expansion, almost without heat generated, quiet, stable running in high-speed routing.
- 3-Position Depth Stops: A square turret built inside the head which gives 3 depths spindle travel control, stoppers may be adjustable. The knurled knob under head allows operator select depth conveniently
- Spindle Travel: Travel speed adjustment is made from controller on air cylinder. Maximum travel 3-3/4″. The spindle down feed is driven by air cylinder, operated with foot switch. Hydraulic controlled travel end speed provides smoothly feed against the work.
- Lubrication: Spindle assembly fitted with grease nipples for spindle bearing lubrication. Spindle stroke way is automatic lubricated, eliminate worry of failure lubrication.
- Rigid Table: The massive table is scientifically ribbed, precision ground, and perfect squareness to spindle. Rests on heavy trunnions permit 45-degree maximum tilt. Table surface slotted for holding guide fence accurately.
- Drive Belt: Top quality belt assures long service life. Belt tension is made with handwheel through a rack and gear mechanism giving positive belt tension and correct belt track.
- Collets Included – Double taper type: 1/4″ 3/8″, 1/2″, 5/8″. Metric sizes available as an option: 6, 9, 12mm.
- Guide Pins Included: 1/4″, 3/8″, 1/2″.
- 7.5HP Spindle Motor with magnetic switch.
- Dust cleaning air gun
- Brush ring shroud
- Fence for straight routing
- Dust Hood: 3″ diameter outlet
- Grease: One bottle spread, recommended grade SUN-742EP.
|
Chuck to table top maximum |
11″ (280mm) |
|
Throat clearance |
29-1/2″ (750mm) |
|
Spindle speeds (2 speeds) |
10,000 / 20,000 RPM |
|
Spindle travel |
3-3/4″ (95mm) |
|
Depth stops |
3 Position turret stops, adjustable |
|
Table travel |
7-1/2″ (190mm) |
|
Table surface area |
36″ x 40″ (915 x 1016mm) |
|
Table tilt |
Front downward to 45degrees |
|
Micrometric table raise |
3/64″(1mm) per revolution of handwheel |
|
Collet sizes |
1/4″ 3/8″ 1/2″ 5/8″ |
|
Spindle drive motor |
7.5HP |
|
Belt size |
35 x 2330mm |
|
Net weight |
720kgs (1590 lbs) |
|
Gross weight |
900kgs (1990 lbs) |
|
Packing dimensions |
66″ x 44″ x 72″ (L x W x H) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CANTEADORA
CANTEADORA PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensu...
AMXmachinery1
TALADRADORA 32 mm, 21 CABEZALES
TALADRADORA 32 mm, 21 CABEZALES PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precisio...
AMXmachinery1
PARTE: 4NE-P4AXIS - PANTOGRAFO CNC - 4 EJES - 4 AXIS
PARTE: 4NE-P4AXIS - PANTOGRAFO CNC - 4 EJES - 4 AXIS
NUEVO CON GARANTIA6 Pieces 5.5kw 24.000rpm Spindle Motor with ATC and ceramic bearings• For each motor 3 tool magazine (Totally 18 magazine)• Control Unit: TPA (İtalian)• Remote Control : YES• Self Lubrication System : YES ( Automatic )• Pegasus Cad Cam 4 Axis Standard Program ( Italian )• Working Dimension: Max Diameter:300mm Max Lenght: 2000mm• Total Power: 41 kw• Weight: 5000 kg• Machine Dimension: Lenght: 4000mm * Wid...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL12Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for en...