Identificador: 99
Abierta
Descripción
RODILLOS DE POLIURETANO PARA POSTFORMADORAS EVANS MACHINERY
PARTE # 2EV-10707 - RODILLO DE SILICON
PARTE # 2EV-10708 - RODILLO CORTO
PARTE # 2EV-10709 - RODILLO LARGO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62” - EVANS
PARTE: 12540 - PINCH ROLLER - CAPACIDAD 62”
- EVANS
USADA - BUENAS CONDICIONESCapacity with Solid Top and SegmentedBottom RollerMax.Width: 62"Feed rate 50 Feet Per MinuteSafety Gates on in-feed and out-feed
sidesWorks with Contact Adhesive or PVA's
white glueHeavy Duty Construction1/2 Hp, 8 Amps 110V MotorWorking Height: 30.5"Max. Thickness: 2"Air Requirement: 100 PSI
Foot Print:
74" x 28"
AMXmachinery
DESCORTEZADORA 27"
PARTE # 11909 – DESCORTEZADORA NICHOLSON 27” A5AFabricación: 1996Tandem Ring w/Slitter Arm Barker240 FPMAir Seal Beater Ring440V 3PhaseSerial#6705Tandem RH 10 Roll.
AMXmachinery
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
PARTE:
3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIAOne way feeding onlyWork width: 250 mm (25 degrees), 55 mm (60 degrees)Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variableFeed speed: 88 m/min (60hz), 73 m/min (50hz)Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw2 knife stocks on top and bottom surfacesKnife type: Changing blade typeKnife size: 335 length x 66 x 8 mmAccessories: Changing blades and standard toolsMachine size: (WxLxH...
AMXmachinery
ENCHAPADORA DE CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOS
PARTE: 2MK-FLEX - ENCHAPADORA DE
CANTOS PORTABLE - CON CALDERIN - RECTOS Y CURVOSNUEVA CON GARANTIAGlue: Granulated Hot-Melt Low TemperatureGlue Temperature: 130º to 180º CTape height: 0-35/64” to 1-57/64”Tape thickness: 0.3 mm - 1 mmFeeder speed: 0 to 19 ft/minPower: 700 WMotor: 1 PhaseVolts/Amps: 127 V - 5,5 A or 220 V - 2,5 AWeight: 21 LbsPerfect for bonding edge tapes to curved pieces.The hand-held is perfect to applying edgebanding to concave and convex curved pieces. It works with...