Identificador: 186
Abierta
Descripción
PARTE # 12C-R12 - REFILADORA
Capacidad de refilado de 3 a 5 mm
Motor de refilador de 1 hp 220 volts
Ajuste de corte de refilador recto y curvo
Corte 1 cara
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISIONUSADO - BUENAS CONDICIONESYear
2018Precision
58" Chip Pac6-Knives72"
CycloneH-Type
blower with dual load out chutes6'x6'
Screen
25'
Vibrating Infeed with transition chute to chipper with fiberglass section and
MDI metal detector
AMXmachinery
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
AMXmachinery
ENCHAPADORA
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,- Total enclosure covers with dust hood connector.- Heavy and rigid construction to ensure necessary accuracy and stability.- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.- The top pr...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30”
PARTE:
12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min...