Identificador: 289
Abierta
.jpg)
.jpg)
Descripción
PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
GRABADORA DE MOLDURAS - MAKOR
PARTE: 12419 - PRENSA - GRABADORA DE MOLDURAS
- MAKOR
USADA – MUY BUENAS CONDICIONES
This
machine has been designed to hot-press directly on wood or using wood paste.
It
is particularly suitable for coffins and funeral fittings, furniture and
accessories, picture frames, pelmets, etc.
Press
length 17.71" to R/L
Material
max width; 7.68")
Engraving
depth 3mm
Dual
propane torch heaters
Includes:
Large inventory of wheels as shown
230 Voltage 60 Cycle 3 Phase
...
-500x500.jpg)
AMXmachinery
LIJADORA DE TAMBORLIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDER – 2 RODILLOS – 37” ANCHO - SUPER SANDER
PARTE # 11869 – LIJADORA DE TAMBOR – 2 RODILLOS – 37” ANCHO - SUPER SANDEREn buenas condicionesRodillos 100 cm de largoMotor 7.5 HP, 220V, 2 fasesMotor alimentador 1 HP, 220V, 2 fasesRPM 1760
AMXmachinery
COLECTOR ASERRIN 10, 20, 25 HP
PARTE # 2TA-DC-9100 – COLECTOR DE ASERRIN – MOTOR 10 HP – 8900 CFMPARTE # 2TA-DC-9200 – COLECTOR DE ASERRIN – MOTOR 20 HP – 12200 CFMPARTE # 2TA-DC-9250 – COLECTOR DE ASERRIN – MOTOR 25 HP – 14600 CFMNuevo con garantia- Heavy sheet metal frame and base.- Extra large radial-fin type steel impeller for high efficiency air flow.- Heavy duty, totally enclosed industrial motor for maximum air suction and extended service life.- Low sound levels to keep the working area quiet.SPECIFI...
AMXmachinery
TORNO GENINI - MINIAUTOMAT
PARTE # 10395 - TORNO GENINI - MINIAUTOMATUSADO - EN MUY BUENAS CONDICIONES DE OPERACIONTOTALMENTE AUTOMATICOTIENE 5 FUNCIONES DE CORTECAPACIDAD MAXIMA DE TRABAJO: HASTA 10 CMS DIAMETRO Y 15 CMS LARGOALIMENTADOR AUTOMATICOTIENE LUNETAS PARA DE 1 A 10 CM, 10 JUEGOS DE LUNETAS CON CAMPANA APROX.LA HERRAMIENTA INCLUIDA TINE UN VALOR SIMILAR AL DEL MISMO TORNOLA VELOCIDAD DE OPERACION PROMEDIO ES DE 4 A 5 PIEZAS/MINMOTOR 7.5 HP, 220V, 3 FASESTIENE MUCHA HERRAMIENTA PARA HACER 50 PIEZAS DIFERENTESMA...