Identificador: 283
Abierta
Descripción
PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRA
NUEVA CON GARANTIA
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
| Specifications | BS-1212HR |
|---|---|
| Max. Cutting Capacity | 12" x 8" (300 x 200 mm) |
| Minimum Cut Piece | 0.08" (2 mm) |
| Saw Wheel Diameter | 24" (600 mm) x 2 |
| Saw Blade Length | 184" ~ 184¼" (4670 ~ 4680 mm) |
| Saw Blade Width | 1¼" (32 mm) |
| Saw Blade Speed | 6000 FPM |
| Conveyor Belt Sizes (W x L) | 11" x 165" (270 x 4200 mm) |
| Feed Speed (Variable) | 0 ~ 70 m/ min |
| Feed Conveyor Tilt | 0° ~ 30º |
| Conveyor Height From Floor | 40" (1016 mm) |
| Saw Wheel Motor | 20 HP |
| Blade Lift Motor | ½ HP |
| Dust Hood Outlet Diameter | Ø4" |
| Machine Dimension (L x W x H) | 88" x 86" x 74" (2235 x 2180 x 1881 mm) |
| Packing Dimensions (L x W x H) | 91" x 88" x 80" (2300 x 2235 x 2032 mm) |
| N. W. | 2646 LBS (1200 kg) |
| G. W. | 3087 LBS (1400 kg) |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
PART: AMX-10055-E - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
PART:
AMX-10055-E - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME
MANUFACTURING
USED
– GOOD CONDITION - Sold as is - Where it isBrand:
Craft Inc. from South Attleboro MassachusettsModel: COBRA AHM-01Serial: 079127V, CE36
reels included with approximate 6000 hangers each reelMachine
dimensions: 72” length x 26” wide x 62” height Shipping
dimensions:Machine:
32” width x 79” length x 66” height - wood palletReels:
28” width x 30” depth x 60” he...
-500x500.jpg)
AMXmachinery
FINGER JOINT SEMIAUTOMATICO
PARTE # 32M-FJS-005 – SISTEMA FINGER JOINT – SEMIAUTOMATICOEscalable a AutomaticoIncluye:Trompo- Motor Finger 20 HP- Motor Escuadra 5 HP- Motor Mesa 2 HP- Motor Bomba Hidraulica 1/2 HP- Velocidad 3-4 veces/minEnsambladora- Area de trabajo 5000mm largo x 150mm ancho x 75mm alto- Motor Cortador 5 HP- Motor Alimentador 1/2 HP- Motor Bomba Hidraulica 5 HP- Capacidad/min 3-4 piezas/min
-500x500.jpg)
AMXmachinery
LIJADORA DE BASTONES DOBLE
PARTE # SIL-DC-SD220 - LIJADORA DE BASTONES - 2 LIJASNueva con garantiaCapacidad de ½” a 2” de diámetroNueva con garantía 6 meses en partes mecánicasMotor de 5 HP, 220V, trifásicoVelocidad de las Bandas 5,000 pies/minVelocidad de avance: 15 - 18 mt/minTamaño de la lija 5” x 73”Tamano de la maquina: 29-1/2" x 33-1/2" x 53"Peso neto: 870 lbs, Peso bruto: 1120 lbsVideo Maquina Trabajando: VIDEO 1