Identificador: 471
Abierta
Descripción
PARTE: 1SL-DC-SP10-M - PRENSA HIDRAULICA - 10 TONS CON MANOMETRO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KWNew with warrantyFor mass productions, 2 to 3 minute per cycle for drying or bending the wood projectVarieties of wood bending shapes are able to produce.Press one large part, slicing into many small pieces for high productivity.Meet all kinds of furniture fabrications.One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.Using wooden mold instead...
AMXmachinery
CANTEADORA 6" - MOTOR 1.5 HP
PARTE:
SIL-DC-WJ6P - CANTEADORA 6" - MOTOR 1.5 HP
Motor: 1.5 H.P., 110/220V., 60Hz, 1 ó 2 Fases
Altura De La Mesa: 32”
Tipo De Empaque: 1 caja
Peso De La Máquina: 93 Kg.
Máx. Profundidad De Corte: 6” x 1/8”, 3” x 1/4”
Capacidad Máx. De Traslape: ½”
Inclinación De La Guía: 45°, 90° y 135°
Cantidad De Cuchillas: 3 pzas.
Ancho Máximo De Desbaste: 6"
Dimensiones De La Mesa De Entrada: 22” x 7-1/2”
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...