Identificador: 2575
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PRENSA CNC 33 TONELADAS 5' PARTE: 2GM-HPB-3305CNC
Is a 33 ton press brake with two axis Estun Control. This is a Taiwain quality machine, designed in the USA. With it's rugged steel framework, quality hydraulic and electronic components, makes this press brake a great addition to any shop.
- ISO 9001 certified
- Meet OSHA and CE safety standard
- Easy-to-use programmable Estun E21 control
- Easy programming, stores 40 programs
- Estun E21 control keep a pice count for large production run
- Japan Yaskawa drive
- Precision ball screws for 24” back gauge
- Germany Rexroth hydraulic system
- Schneider electrical components
- All steel construction for maximum rigidity
- Hydraulic logic system centrally located and quiet
- Safety type foot pedal with E21 screen, control panel and E-stop switch
- Safety 24V low voltage & overload protection
- Estun E21, 2 Axis Controller
- ( 2 ) 24” front support arms
- Quick release segmented ( American Style Tooling ) punch holder
- Full Length Gooseneck Punch HRC 50 Full Length Vee Die with 6 assorted sizes HRC 50,1”,3/4”,5/8”, ½”, 3/8”, ¼”
- Lntech Light Curtain System
- Side and Back Safety Fence
- Movable Foot Pedal with E21 screen, control panel ,and E-stop meet OSHA safety standard
| Maximum Pressure | 33 Tons |
| Bending Lenght Capacity | 63" (5'3") |
| Distance Between Uprights (housing) | 51" |
Ram Stroke Travel Cylinder Travel Adjustment (max) | 4" 2" |
| Table Width | 6" |
| Distance Between Table and Ram | 13-1/4" |
| Throat Depth | 8" |
| Back Gauge Distance | 21" |
| Back Gauge Repeatability | .008" |
| Y-Axis Repeatability | .008" |
Approach speed, inch / second Working speed, inch / second Return speed, inch / second | 3.5” 0.39” 2.75” |
Main motor:
Motor for back gauge:
Motor for bending angle setting: | 5-1/2 HP, 3 Phase 25 AMP Prewired: 220VAC (+/- 10%)
1 HP, 3 Phase 220VAC (+/- 10%)
1/2HP, 3 Phase 220VAC, (+/- 10%) |
Hydraulic oil tank capacity:
Recommended Oil: | 20 Gal.
Hydraulic Oil Shell #68HD |
Machine weight: Machine size, L x W x H: Shipping dimensions: | 5,350 LBS 91"x56"x87” 91"x56"x87" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12" ANCHO
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12"
ANCHONueva con garantía4’ infeed, 6’ outfeed for easy gluing applicator setup.Grooved rubber roller for water-based wood working glue spreader.Removable stainless steel conveyor belt, glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The glue applicator and conveyor are driven by industrial 1/2 HP total enclosure motor.All comp...
AMXmachinery1
FINGER JOINT AUTOMATICA
FINGER JOINT AUTOMATICA PARTE: 2CK-FL18Represents a state-of-the-art finger jointing production line, meticulously engineered to transform wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted for enduring reliabi...
AMXmachinery1
CEPILLO 2 CARAS - 25 PULGADAS
PARTE: 2CK-GT635ARDHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system allowing it to act like a jointer to flatten the board prior to being planed to an accurate thickness with the top head.Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat...
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...