ID: 1900
Open
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS
1 - PRENSA CALIENTE DE VAPOR CON 9 PLATOS Y 8 ABERTURAS MARCA IND. G.H. CON DIMENSIONES DE 60” POR 108” ACCIONADA POR UNIDAD HIDRAULICA, EQUIPADA CON MESA DE ALIMENTACION, MOTORES DE 2 A 7.5 HP ASI COMO 15, 30 Y 40 HP CON RELOJ DIGITAL PARA EL TIEMPO DE PRENSADO CON UN RANGO DE 1 A 30 MINUTOS, CON BOMBAS HIDRAULICAS EN EL INTERIOR DE DIFERENTES CAPACIDADES DE 5 A 20 HP.
PLATES: 56" X 108"
PRESSURE WHEN IN USE: 2300-2500 LBS
TEMPERATURE: 118-130 DEGREES CELSIUS FOR VENEER GLUING
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
FINGER JOINT GRECON TURBO
PARTE # 11770 – SISTEMA FINGER JOINT – GRECON TURBOEn buenas condiciones de operaciónManufactura: 2000Technical designPackage systemHorizontal jointVertical joint Number of milling units: 2Workpiece width max mm: 205Workpiece thickness max mm: 80Infeed length max mm: 1.000Infeed length min mm: 150Package width mm: 600Pressing length mm: 6.100Total pressure kg: 12.000Capacity m/ shift: 16.000Capacity of router cycles/min: 6,5Transfer capacity parts/min: 120Capacity of press cycles/min: 7Loa...
AMXmachinery
ASERRADERO PORTATIL WOODMIZER LT15
PARTE # 10401 - ASERRADERO PORTATIL WOODMIZER LT15EN BUENAS CONDICIONES DE OPERACION
AMXmachinery
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
PARTE:
2DO-PMC-HD –
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP -
MESA 30”X 96” - USO RUDO
Nueva con garantíaHeavy
duty welded structure. They feature dust hoods on both sides, a table with
steel rollers and virtually wear free balanced and quiet running aluminum
pulleys. All models are equipped with a magnetic starter (overload protection)
and belt guards. Maximum
Part Length:Pressure
Pad Traveling Bar: 96"Pressure
Pad Traveling Bar Contact Wheel Assem...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...