Identificador: 94
Abierta
Descripción
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138
All Form 8' capacity
- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz
- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)
- Standard Features:
- Overhead clamp and vacuum system
- Forming length capacity 100"
- 1 ½” maximum forming radius. (3” thick material)
- Foot print 4' wide X 11' long
- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit
- Integrated timer. Individual control on all air components.
- Working height 36"
- Crated weight 1855 LBS.
- Shipping dimensions 143” long X 46” wide X 57” high
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12136 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE: 12136 - PRENSA DE TABLEROS – 20 SECCIONES –
TAYLOR
USADA – MUY BUENAS CONDICIONES
Desmantelada y lista para envío
(1) 8.5' Clamp frame
(6) Section
(20) clamps per section
3-1/2" jaws with 36"
clamping length
Pneumatic rotation by air
control power feed
Model: 8.5-6
Year of Manufacture: 2005
230V, 60 cycle, 3 phase
Shipping Footprint: 10
(length) x 8 (width) x 8 (height)
AMXmachinery
PARTE: 1SL-DC-LBD69 - LIJADORA DE BANDA Y DISCO
PARTE: 1SL-DC-LBD69 - LIJADORA DE BANDA Y DISCONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 Hz, 1 FASEDIMENSIONES DE LA MESA: 6-1/4" X 12"DIAMETRO DEL DISCO LIJADOR: 9"DIMENSIONES DE LA BANDA LIJA: 6" X 48"PESO: 51 KGSEMPAQUE: 1 CAJA
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
LIJADORA DE BASTONES
PARTE # SIL-DC-SD210 - LIJADORA DE BASTONES - 1 LIJANueva con garantiaCapacidad de ½” a 2” de diámetroNueva con garantía 6 meses en partes mecánicasMotor de 3 HP, 220V, trifásico - Industrial Uso RudoVelocidad de las Bandas 5,000 pies/minVelocidad de avance: 15 - 18 mt/min Tamaño de la lija 5” x 73”Tamano de la caja: 29-1/2" x 33-1/2" x 53"Peso neto: 660 lbs, Peso Bruto: 880 lbs.Video de la maquina trabajando: VIDEO 1