ID: 2617
Open
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOP
AMXmachinery
Description
PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOP
USADO – MUY BUENAS CONDICIONES – COMO NUEVO
BALEROS NUEVOS MARCA FAG
PPROBADO
CONECCION PARA BRIDA
MARCA: TECHTOP
15 HP
230/460V
3 FASES
33.1/16.9 AMP
RPM: 3550
MEDIDAS: 23.5” LARGO X 12.25” ANCHO X 15.5” ALTO
SE ENVIA EN PEQUENA TARIMA
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 2CK-MX340 – ENCHAPADORA DE CANTOS AUTOMATICA
PARTE: 2CK-MX340 – ENCHAPADORA DE
CANTOS AUTOMATICA
NUEVO CON GARANTIAHigh-quality
edge banding results for cabinet parts and case goods.The
MX340 Automatic Edgebander is a compact edgebander capable of applying up to
3mm thick edge tape on cabinet parts and more. It comes equipped with
high-frequency motors on both the end trim and top & bottom trim. In
addition, it is equipped with PVC radius scraping and buffing units. Its
compact design and affordable price point make it th...
AMXmachinery
ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
PARTE: 12128
- ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68”
USADA – MUY
BUENAS CONDICIONES - REACONDICIONADA
Width
Capacity: 68"
Grooved,
Rubber-Covered Applicator Rolls
Applicator
Roll Diameters: 7.75"
Main Motor:
1.5 HP, 208-230/460v, 3ph
Hard
Rubber-Covered Doctor Rolls
Top-Elevator
Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment
Mechanical
Digital Readout for Thickness
Currently
460v, 3ph (Ask about Voltage Change)
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PG-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps.
Medidas interiores: ancho 666 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Since you are load...