Identificador: 2204
Abierta
PARTE: AMX-10163 - EXTRACTOR DE PARED - 35” ANCHO X 39” ALTO X 10” FONDO
AMXmachinery
Descripción
PARTE: AMX-10163 - EXTRACTOR DE PARED - 35” ANCHO X 39” ALTO X 10” FONDO
USADO - MUY BUENAS CONDICIONES
MEDIDAS: 35” ANCHO X 39” ALTO X 10” FONDO
MOTOR 1/3 HP, 208/230V, 1 FASE
RPM: 825
Video: https://vimeo.com/870538760
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...
AMXmachinery
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS 19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
PARTE: AMX-10123 - EXTRACTOR DE PARED - ASPAS
19” DIAMETRO - MOTOR ½ HP - S&P - HEP-500
USADO - BUENAS CONDICIONES
MOTOR ½ HP, 220/440V, 3 FASES
RPM 1725
VOL. 10,300 M/H
MEDIDAS: 63 CM ANCHO X 63 CM ALTO X
36 CM FONDO
AMXmachinery
PARTE: 12573 - TALADRO MULTIPLE - ALTA PRODUCCION - RILESA - UNI-X 2200 MM
PARTE: 12573 - TALADRO MULTIPLE - ALTA PRODUCCION -
RILESA - UNI-X 2200 MM
USADO - MUY BUENAS CONDICIONESPLC
Control System with 15” Color TFT Touch-screen DisplayPneumatic
magazine with ergonomic and user-friendly accessEnd
Mounted Horizontal Drilling Groups: 2 @ 1.1kW(1.5HP) 3-5000RPMRear
Mounted Horizontal Drilling Groups: 4 @ 1.1kW(1.5HP) 4000RPMTop
Mounted Vertical Drilling Groups: 6 @ 1.1kW(1.5HP) 4000RPMPneumatic
side movement of drill groups for copy function of holesBackstop...
AMXmachinery
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANAL
PARTE: 2AM-U-500 - ARMADORA DE MARCOS PROGRAMABLE - 1 CANALOur U-500 is recommended for high-volume production facilities that require the primary use of a single sized V-Nail for frame joining. The U-500 has the same user-friendly, touch screen interface as our U-600 Underpinner. The only difference between the two models being the U-500 has single channel capacity compared to a multi-channel with the U-600 unit.With data storage of 5,000 different frame profiles, the operator can easily recall...