Identificador: 2066
Abierta
Descripción
PARTE: AMX-10155 - EXTRACTOR DE TURBINA - 2 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 2 HP, 110/220V, 1 FASE, 3,450 RPM
ENTRADA REDONDA: 5”
SALIDA RECTANGULAR: 5” X 6”
MEDIDAS TOTALES: 19” ANCHO X 18” FONDO X 18” ALTO
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA VERTICAL
PARTE # 2MKE-6480-20 – SIERRA DE PANELES VERTICAL – MOTOR 3 ¼ HP – SIERRA 8 ¼” DIAMETRO - MILWAUKEENueva con garantíaPRODUCT SPECIFICATIONSCord Type: 20' FixedVoltage: 120V ACLength: 60"Arbor Size: 5/8"No Load RPM: 5,800Construction Type: Steel, Square TubeBlade: 8-1/4"Spindle: 5/8"Amps: 15Weight: 180 LbsHeigh: 70"Power Source: Corded KEY FEATURES:Rigid all steel frame, square tubing is electrically welded to prevent warping or twisting.Comfortable horizontal handle for convenient on...
AMXmachinery
RESISTENCIA ENSAMBLADO ABAJO
PARTE: 2EV-0110.25K – ENSAMBLADO RESISTENCIAS - ¼” COVER ROD REPLACEMENT KITTamaño paquete 166” x 6” x 6”
-500x500.jpg)
AMXmachinery
PRENSA ENSAMBLADORA FINGER JOINT
PARTE: 2TA-SFJ-4500A - PRENSA
ENSAMBLADORA FINGER JOINTFeatures:
Very efficient automatic
machine that performs three functions:
Jointing of
sectional sticks which have been glued
Cutting the jointed
sticks to desired length
Final assembly is
securely pressed by powerful hydraulic system
Then the jointed
sticks be fed out regularly
Auto power feeder
for fast feeding and auto stops at the desired length to be cut.
Furnished with
cut-off saw as standard equipment for c...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...