Identificador: 1922
Abierta
PARTE: AMX-10139 - EXTRACTOR CENTRIFUGO - MOTOR ½ HP, 220/440V, 3 FASES - SALIDA PLANA - FM ITALY
AMXmachinery
Descripción
PARTE: AMX-10139 - EXTRACTOR CENTRIFUGO - MOTOR ½ HP, 220/440V, 3 FASES - SALIDA PLANA - FM ITALY
USADO - BUENAS CONDICIONES
MEDIDAS: 24.5” ANCHO SALIDA PLANA X 27.5” FONDO X 18” ALTO
MOTOR ½ HP, 220/440V, 3 FASES, CERRADO
MARCA: FM ITALY
HECHOS EN EUROPA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
PARTE 12630 - CONTORNEADORA - BALESTRINI - C70-N
PARTE
12630 - CONTORNEADORA - BALESTRINI - C70-N
USADA – BUENAS CONDICIONES
AMXmachinery
PEGADORA DE SABANAS - FISHER RÜCKLE
PARTE
# 12161 – PEGADORA DE SABANAS - FISHER RÜCKLE
USADA – MUY BUENAS CONDICIONES
Year of manufacture 1993
Opening width mm 2.850
Veneer thickness min mm 0,4
Veneer thickness max mm 2
Strip width min mm 70
Strip width max mm 430
Width of lifting table mm 430
Feedrate max m/min 24
Gluing aggregate Yes
Cross splicing machine Yes
Lift table Yes
Trimming unit Yes
Joint Only edge gluing
Operating status dismantled/ stored
AMXmachinery
REASERRADORA HORIZONTAL – 2 SIERRA BANDA – 400 MM ANCHO X 250 MM ALTO
PARTE:
3HP-HP-400-2 - REASERRADORA HORIZONTAL – 2 SIERRA BANDA – 400 MM ANCHO X 250 MM
ALTO
Nueva con garantía – Uso
Rudo
Specifications:1.With Digital Readout
2.Max. Workpiece Size: 400mm(W) x 250mm(H)
3.Conveyor Belt Size: 385mm(W) x 8130mm(L)
4.Saw Wheel Dimension: Φ28" x
2"(Thickness)
5.Saw Blade Size: 180"(L) x 2"(W)
6.Dust Hood Diameter: 4" x4
7.In-feed Speed: 4-20M/min
8.Cutting Size: 4-250mm(T)
9.Controlling Blade Tension: Air/Hydraulic
Compensa...