Identificador: 2307
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
AMXmachinery
Descripción
PARTE: 4BA-DPM-ED-2141 – SIERRA ESCUADRADORA VERTICAL – CAP. 2100 MM X 4100 MM X 60 MM
Nueva con garantía
Demo model with about 30 hours on it
Specifications
- Comes with digital readouts on the vertical and horizontal axis, readout in decimal inches or mm
- Processing sheets both horizontally and vertically
- Cutting height is 2100mm
- Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
- Weight 2400 lbs
- Thickness of cut is 0-60mm
- Comes with main blade and scoring blade
- Motor hp is 4.0 (3 kW) three phase, 208/230 volts
- Needs to be hooked to external dust collection
- Moveable front panel supports. (Pneumatic automatic movement up and down using sensor system
- Bottom supports are metal wheels
- Machine comes with 1 year warranty
- Pneumatic locking of gantry and head
- Voltage is 230/208 volts, 3 phase.
- Dual scales, imperial and metric
- Gantry locks in position every 40" for vertical cuts
- Has a mid-shelf supports for cross cutting narrow boards, instead of putting on bottom rollers
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12020 - BRIQUETEADORA PARA METAL/MADERA - RUF
PARTE: 12020 - BRIQUETEADORA PARA METAL - RUF
USADA – BUENAS
CONDICIONES
Features:
Extremely high pressing pressure,
Throughput capacity for aluminium chips up to
60 kg per hour
Throughput rate for wood up to 40 kg per hour
Spec. pressing pressure max.: 3700 kg/cm2,
Engine: 4 kW,
Weight: 1 ton
Briquette size: 60x40mm
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
PARTE:
2CK-HR66 - REASERRADORA HORIZONTAL - 2 BANDAS GEMELAS
NUEVA CON GARANTIAWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motorVideo: https://vimeo.com/668680300
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
from lower ...
AMXmachinery
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECHUsada – Buenas condicionesMotor principal 15 HP, 460/60/3 electricsModelo: SLR-12SCMfg. 2017