Identificador: 1302
Abierta
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
AMXmachinery
Descripción
PARTE: 3MA-ULTRAWII - CEPILLO 2 CARAS - 250 MM ANCHO - 3 HP - MARUNAKA
NUEVO CON GARANTIA
One way feeding only
Work width: 250 mm (25 degrees), 55 mm (60 degrees)
Work Height: 180 mm
Knife bias angle: 0 - 60 degrees variable
Feed speed: 88 m/min (60hz), 73 m/min (50hz)
Feed motor : 2.2Kw x 2 motors
Head up/down motor: 0.2 Kw
2 knife stocks on top and bottom surfaces
Knife type: Changing blade type
Knife size: 335 length x 66 x 8 mm
Accessories: Changing blades and standard tools
Machine size: (WxLxH): 940 x 1920 x 1405 mm
Net Weight : 1,080 Kg
Packing size: (WxLxH): 1200 x 2150 x 1750 mm, G/W: 1,350 kg
Top planing and bottom planing performed by one machine. Since two knives, one for rough planing and one for finish planing are set at both of top and bottom, both sides can be planed with just one workpiece feed. Therefore, planing time can be shortened considerably. It can also be built into a line. Variable bias angle system permits to choose the optimum bias angle to obtain the best finishing for the workpiece according to its hardness and moisture content.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
TORNO COPIADOR IRREGULAR MULTIPLE CON LIJADOR
PARTE # 2TA-CL-1006S - TORNO COPIADOR IRREGULAR MULTIPLE CON LIJADORPARA FABRICAR 4 a 5 PIEZAS A LA VEZIDEAL PARA EL COPIADO MULTIPLE DE PIEZAS COMO PATAS PARA SILLAS PROVENZALES Y QUEEN ANNE, CABOS PARA PALA, ZAPAPICO, ETC.Features:Use the template to make easy duplicate copy performance.Specially designed for processing wood under the length of 39-1/2" and diameter of 8-1/4".Runs automatic continual cycles from feeding to finish.Variable cutting speed controls and uses hydraulic power to get ...
AMXmachinery
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
PARTE: 12485 - DOBLADORA DE TUBO - SB-210046
USADO BUENAS CONDICIONES
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...
AMXmachinery
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHO
PARTE: 1SL-DC-WPM13 - CEPILLO MOLDURADOR 13" ANCHONUEVO CON GARANTIAMOTOR: 1.5 HP, 220V, 60 Hz, MONOFASICOTAMANO DE LA MESA: 18" X 14"CAPACIDAD DE CORTE: 13" X 6"MAX. PROFUNDIDAD DE CORTE: * 1/8" PARA TABLAS HASTA 5-1/2"13" * 1/16" PARA TABLAS MAYORES A 5-1/2"VELOCIDAD DE CABEZAL: 5000 RPMVELOCIDAD DE ALIMENTACION MOLDURADOR: 12 PIES/MINCAPACIDAD DE ANCHO EN MOLDURADOR: 2-1/2" A 6"DIMENSIONES MAQUINA: 44" ALTO X 24" ANCHO X 36" FONDOPESO: 120 KGSTIPO DE EMPAQUE: 2 CAJAS* L...