Identificador: 25
Abierta
Descripción
PARTE: 2TA-TG-6000 – AFILADORA DE CUCHILLAS RECTAS
Nueva con garantia
Features:
Heavy-duty straight knife grinder, rapid for grinding processing and saving time.
Economical model and efficiency for processing high powerful of any straight knife grinding such as Planner & Jointer Knife, Peeling Knife, Super Surface Knife, and Veneer Cutting Knife.
Automatic grinding table movement forward and backward, label saver.
Employed with straight linear motion guides bearing to ensure longitudinal feed traverse smoothly and accurately.
The knife can be put through a coarse wheel grinding, then a fine wheel grinding for sharpening the knife edge again to obtain the super sharp edge and extend the cutting life of the knife.
Built in coolant pump for faster grinding.
Heavy sheet metal cabinet stand and cast iron body.
High precision and durability.
SPECIFICATIONS | 2TA-TG-3000 | 2TA-TG-5000 | 2TA-TG-6000 |
Grinding Capacity |
|
|
|
Cutter (Dia. x W) | 9" x 8" | N/A | N/A |
Carbide Saw (Dia. x T) | 20" x 3/8" | N/A | N/A |
Carbide Knife (L x W x T) | 12" x 1½" x ¼" | 25" x 3" x 5/8" | 25" x 3" x 5/8" |
Router Bits (Shank) Max. | ½" | N/A | N/A |
Grinding Wheel Size | 6" x 5/8" | 4" x 2" x 5/8" | 10" x 2/3" x 1" |
Grinding Head Travel | 14" | 26" | 26" |
Grinding Wheel Speed | 5000RPM | 1700 RPM | 1700 RPM |
Fine Grinding Wheel Size | N/A | --- | 4" x 2" x 2" |
Grinding Wheel Motor | 1 HP | ½ HP | 1 HP |
Fine Wheel Motor | N/A | --- | --- |
Table Size | 28' L x 8" W | 26" L | 27" L |
Table Travel | 20" x 7" | (Wheel) | 28" |
Table Travel Motor | --- | ¼ HP | ¼ HP |
Coolant Pump Motor | 1/8 HP | N/A | 1/8 HP |
N.W. (LBS) | 748 LBS | 340 LBS | 660 LBS |
G. W. (LBS) | 924 LBS | 430 LBS | 836 LBS |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"
PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”,
6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8"
USED - VERY GOOD CONDITIONS
North American
Gladu hydro-lock
6 wing
20 degrees
Interior diameter (bore): 1-13/16”
External diameter: 6” (150 mm)
Lenght 2-1/4” (57 mm)
Lenght 3” (75 mm)
Lenght 4” (102 mm)
Lenght 5” (130 mm)
Lenght 6” (152 mm)
-500x500.jpg)
AMXmachinery
RODILLOS POLIURETANO
RODILLOS DE POLIURETANO PARA POSTFORMADORAS - EVANS MACHINERYPARTE # 2EV-10707 - RODILLO DE SILICONPARTE # 2EV-10708 - RODILLO CORTOPARTE # 2EV-10709 - RODILLO LARGO
AMXmachinery
SANDER QUICKWOOD ELITE PRO1100
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100Machine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)* ACOUSTIC INSULATION...THIS SAN...
AMXmachinery
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO - TEKMAK
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO
- TEKMAK
USADOS - BUENAS CONDICIONES
Revisados - Baleros nuevos
Motor ½ HP, 220/440V, 50/60 Hz, 3 fases, 1720 RPM
Medidas totales: 20” largo x 15” fondo c/u
Altura total minima: 17.5” c/u
Altura total máxima: 19.5” c/u
Rueda pulidora: 1.5” ancho x 8” diámetro c/u
Hecho en ItaliaEl banco donde estan puestos actualmente donde se tomaron las fotos no esta incluido