Identificador: 272
Abierta
.jpg)
.jpg)
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
AMXmachinery
Descripción
PARTE: 2TA-PT-2024HF – PRENSA DE TABLEROS - ALTA FRECUENCIA 20” X 24”
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DOBLADORA HIDRAULICA
PARTE # 2MA-HBB-0412 - DOBLADORA HIDRAULICA - USO RUDOModel # 2MA-HBB-0412, 4’ x 12 GaModel # 2MA-HBB-0410, 4’x 10 GaModel # 2MA-HBB-0612, 6’ x 12 GaModel # 2MA-HBB-0610 , 6’x 10 GaModel # 2MA-HBB-0812, 8’ x 12 GaModel # 2MA-HBB-0810 , 8’x 10 GaModel # 2MA-HBB-1014, 10’ x 14 GaModel # 2MA-HBB-1010, 10’ x 10 GaStandard Features:· Taiwan Machines· ISO 9001 certified· Hydraulic adjustment for opening· Hydraulic pow...
AMXmachinery
LIJADORA ORBITAL – TIMESAVERS
PARTE: 12155 – LIJADORA ORBITAL – TIMESAVERS
USADA – BUENAS CONDICIONES
Cabeza
Orbital y Cabeza de cepillo Quickwood de-nibbing
AMXmachinery
PARTE: 12173 - DOBLADORA DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
PARTE: 12173 - DOBLADORA
DE TUBOS – HIDRAULICA - CAPACIDAD DIAMETRO 4-1/2”
Usada – Buenas
condiciones, Revisada y Checada
Capacities:
Non-ferrous tubing:
4.5" x .17" - Y.P. to 25,000 PSI
Mild steel tubing:
4.5" x .11" - Y.P. to 35,000 PSI
Stainless steel tubing:
4.5" x .065" - Y.P. to 60,000 PSI
Steel pipe: 3.5" x .24"
schedule 80
Maximum radius:
18"
Tube length over mandrel...
AMXmachinery
PRENSA DE MEMBRANA – FELDER MVP 300
PARTE: 12360 – PRENSA DE MEMBRANA – FELDER MVP 300
USADA – MUY BUENAS CONDICIONES
ESPECIFICACIONES:
Calentamiento: 4.5 kw
Bomba de Vacío: 0.75 kw
Voltaje de Trabajo: 230 volt
Número e Fases: 3
Corriente de Trabajo a carga máxima: 8.3 A
Temperatura de Trabajo 50+-5°C
Temperatura Max: 80°C
AÑO DE FABRICACION: 2012FECHA DE COMPRA: AGOSTO 2013
DIMENSIONES:
Longitud: 3050 mm
Ancho: 1350 mm
Altura: 1600 mm