Identificador: 271
Abierta
Descripción
PARTE: 2TA-PT-13HF-GN – GENERADOR - ALTA FRECUENCIA 13 KW
New with warranty
For mass productions, 2 to 3 minute per cycle for drying or bending the wood project
Varieties of wood bending shapes are able to produce.
Press one large part, slicing into many small pieces for high productivity.
Meet all kinds of furniture fabrications.
One high frequency generator could output two wood-bending presses, or one output four wood-bending presses to achieve continuous mass production.
Using wooden mold instead of expensive steel mold to save development cost dramatically
Use electricity power instead of steam boiler, no influence to the environment without emissions of PM2.5.
High frequency wave penetrate into inside of glue, shorten glue cured period and forming time.
One work is able to operate 4 to 6 bending press machines.
Model: PT-13HF-GN
In Put Power: 20 KVA
Out Put Power: 13 KW
Machine Size (L x W X H): 47" x 28" x 39"
Machine Weight: 820 LBS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
PARTE: 12229 – BASTONERA – MOTOR 15
HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
USADA
– MUY BUENAS CONDICIONES
LARGOS MINIMOS: 16”
VELOCIDAD VARIABLE: 75 A 250 PIES LINELES POR MINUTOS
MOTOR PRINCIPAL: 15 HP, 3,600 A 5,000 RPM
MOTOR ALIMENTADOR: 5 HP
TAMANO MAQUINA: 42” W X 48” L X 46” H
TAMANO MAQUINA CON HOPPER: 42” W X 88” L X 46” H
PESO: 3,000 LBS
VARIOS RODILLOS DE ENTRADA Y SALIDA
VARIOS DIAMETROS DE CABEZALES
VARIOS JUEGOS ...
AMXmachinery
PARTE: 1SL-DC-HQ400-3A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1
PARTE: 1SL-DC-HQ4003A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1NUEVO CON GARANTIADESCRIPCION:- MOTOR 1 HP, 220V, 60 Hz, 2 FASES- HACE ROSCAS MILIMETRICAS Y ESTANDARTORNO:- CAPACIDAD DE VOLTEO: 280 MMDISTANCIA ENTRE PUNTOS: 350 MMDIAMETRO DEL CHUCK: 100 MMVELOCIDADES: 7 VELS (160-1360 RPM)HUSILLO: 19 MMTALADRO:BROQUERO: 1.5 - 13 MMCARRERA DEL HUSILLO: 80 MMCAPACIDAD DE GIRO DE LA CABEZA DEL TALADRO: 90 GRADOSVELOCIDADES: 14 VELS (117-1300 RPM)MEDIDAS TOTALES: 42" LARGO X 23" ANCHO X 35" ALTO...
AMXmachinery
SIERRA TRONZADORA – 7.5 HP - DISCO 14" - IZQUIERDA
PARTE: 12347 - SIERRA TRONZADORA – 7.5 HP - DISCO 14"
- IZQUIERDA
USADA
- BUENAS CONDICIONESMotor 7.5 HP, 220V, 3 phase4100 RPM arbor speedLeft Hand Model uses a 14” diameter saw blade with 1” boreCuts boards up to 1” x 10” or 2”x 9”, 3” x 8” at a rate of up to
95 strokes per minuteStandard full coverage safety guardTable size is 25” x 23-1/4” with a table height of 32-3/4”Requires 600 CFM air supply, and has a 4” diameter dust portMachine weighs 530 lbsOverall di...
AMXmachinery
REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 300 MM ANCHO X 250 MM ALTO
PARTE:
3HP-HP-11P - REASERRADORA HORIZONTAL – 1 SIERRA BANDA – 300 MM ANCHO X 250 MM
ALTO
Con sistema de control hidráulico
Nueva con garantía
Specifications:
1.With digital readout
2.Max. workpiece size: 300mm(W) x 250mm(H)
3.Distance from blade to conveyor Table: 3-125mm
4.Conveyor belt size: 285mm x 5470mm
5.Saw wheel dimension: Φ28" x
1"(Thickness)
6.Max. infeed speed: 16M/min OPTIONAL: 25M/min.
7.Saw blade size: 168" x 1"
8.Saw wheel motor: 20HP
...