ID: 286
Open
.jpg)
Description
PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
PARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRAS
NUEVA CON GARANTIA
| Specifications | BS-1212HR-TN | BS-1616HR-TN |
|---|---|---|
| Max. Cutting Capacity | 12" x 12" | 16" x 16" |
| Distance between Blade to Conveyor | 1/4" ~ 12" | |
| Saw Wheel Diameter | 28" x 2 | |
| Saw Blade Length (Width) | 201" (2") | 201" (2" ~ 3") |
| Saw Blade Speed | 6000 FPM | |
| Feed Conveyor Width | 12" | 16" |
| Feed Speed (Variable) | 0 ~ 90 FPM | |
| Main Motor (Each Head) | 20 HP x 2 | 30 HP x 2 |
| Saw Blade Lift Motor | 1/2 HP | |
| Feed Conveyor Motor | 3 HP | |
| Dust Hood | 4" x 6 | |
| N. W. | 7200 LBS | 8600 LBS |
- Machine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.
- It is equipped with a digital controller for convenient and accurate thickness setting.
- The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.
- When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.
- Variable feed speed is controlled by a frequency inverter for best cutting requested.
- The infeed and outfeed pressure rollers are easily raised or lowered by a gear rack.
- The infeed and outfeed pressure rollers are spring loaded and easily adjusted for the horizontal or vertical direction to suit various workpiece thicknesses.
- Blade tension is adjusted by means of a hand wheel.
- A tension scale allows the operator to correctly adjusted the tension for different blade thickness.
- The cast iron saw blade wheel are dynamically balance for smooth running.
- Blade guard is easily lifted up, supported by two nitrogen gas cylinders for convenient blade change.
- The roller type return conveyor equipped at left side of the machine provides easily repetitive cutting.
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
CALDERA - HURST HYBRID 200, 300, 600 HP
PARTE: 12319 -
CALDERA - HURST HIBRIDAS 200, 300, 600 HP
USADAS - BUENAS
CONDICIONES
Hurst Hibrida 600
HP 150 PSIHurst Hibrida 200
HP 150 PSI
Hurst Hibrida 300
HP 150 PSI
Each system should
include (email for specifics):
Hurst Hybrid
Vessel
Hurst Boild
Furnace with cast grates
Hurst underfeed
stoker system
Hurt Metering
conveyor system
Overfire air
combustion fan
Underfire air
combustion fan
Hurst combustion
air preheater
Access platform...
-500x500.jpg)
AMXmachinery
SANDER QUICKWOOD ELITE PRO1100
PART: 12052-E – SANDER QUICKWOOD ELITE PRO1100Machine has been cleaned & checked.240 Volt 3-PhaseComplete with dust hose & manifoldQUICKWOOD ELITE PRO 1100* MAX WIDTH OF WORKPIECE...43"* MAX HEIGHT OF WORKPIECE...3.9"* MAX LENGTH OF WORKPIECE...INFINITE* LINEAR SPEED OF BELT...2-12 M/MIN (6-36 FT/MIN)* ROTATIONAL SPEED OF BRUSH CAROUSEL...3-16 G/MIN* ROTATIONAL SPEED OF BRUSH SPINDLES...300-1150 G/MIN* (4) DUST EXTRACTION OUTLETS (170MM DIA / EA)* ACOUSTIC INSULATION...THIS SAN...
AMXmachinery
PARTE: 2GB-FJ-00160 - CUCHILLAS FINGER JOINT
PARTE: 2GB-FJ-00160 - CUCHILLAS FINGER JOINTCuchillas de 2 alasMedidas: 160X4.0X50-2TMedidas: 160mm diametro exterior x 4mm espesor x 50mm diametro interiorPuntas de Carburo de Tusgteno2GB-FJ-00160-1 CUCHILLAS ENMEDIO - 2 ALAS2GB-FJ-00160-2 CUCHILLAS ESQUINAS - 2 ALAS
AMXmachinery
TORNO DE DESENROLLO
PARTE # 11856 – TORNO DE DESENROLLO – CAPACIDAD 2700 MM LARGOMarca: R.F.R. Modelo: 16P26Año: 1978Condicion: usadoHecho en AustriaDiametro Maximo de tronco: 1600 mmLargo maximo de tronco: 2700 mm