Identificador: 2631
Abierta
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
AMXmachinery
Descripción
PARTE: 2SP-S-2415 - TRITURADORA - ASTILLADORA - MOTOR 15 HP - ENTRADA 24” LARGO X 36” ANCHO
PARA MADERA, MDF, PLYWOOD, COMPOSITES, PAPEL, CARTON, ETC.
NUEVO CON GARANTIA
24" wide cutterhead block, 24" wide x 36" deep inlet hopper.
15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.
Generates solid material into approximately 3/8" x 1" sizes.
A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic material, composites, paper, cardboard or any like materials that will fit into the hopper.
An automatic reverse switch is included to eliminate any jam by heavy solids like steel or metal objects placed into the hopper.
Options:
480 or 600 V
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORA PARA METAL - HORIZONTAL - HYDRAULICA - 30 HP
PARTE: 12377 - BRIQUETEADORA PARA
METAL - HORIZONTAL - HYDRAULICA - 30 HP
USADA - BUENAS CONDICIONES30
HP Motor10lb
Average Bale (Aluminum)30lb
Average Bale (Steel Chips)38lb
Average Bale (Copper)36
Second Cycle Time (100/hr) -Excl. – HopperVickers
Hydraulic Pump8”
Bore (Main Cylinder)9”
Bore (2nd Compression)4”
Bore (Cover)Approximate
Dimensions: 105” W x 60” H x 186” L (Machine Only)
Approximate Weight: 18,000 lbs.
AMXmachinery
PARTE: 12561 - REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
PARTE: 12561
- REASERRADORA - 2 BANDAS - MORGAN - CON REGRESADOR
Usada - Buenas CondicionesReturn (needs new belt)460 V/3phEquipped with 6” wide infeed and outfeed belt conveyor (hydraulically driven).Equipped with (2) pneumatic hydraulicly driven hold down wheels.Max width cutting capacity: 6” approx.Push button controls. Dual Head design.Each head is powered by a dedicated motor.HP unknown(manufacturing plates are missing on both saw motors and hydraulic pump)Overall dimensions: 156...
AMXmachinery
CEPILLO 24" ANCHO CABEZAL HELICOIDAL
2EX-XP124T – CEPILLO 24” ANCHO – MOTOR 15 HP – TITAN – CABEZAL HELICOIDAL2EX-XP124T – CEPILLO 26” ANCHO – MOTOR 20 HP – TITAN – CABEZAL HELICOIDALNuevo con garantíaCabezal Helicoidal VECTORFeatures:VECTOR or straight knife cutter heads11-3/4” thickness capacityHigh Horsepowers: 20 HP & 15 HP6000 RPM cutterheadPowered top and bottom bed rollersMotorized table elevationDigital thickness controllerSolid cast-iron constructionTriple v-beltsSectional chipbreakersExternally adju...
AMXmachinery
ASTILLADOR SCHUTTE
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360IN GOOD CONDITIONS, AS-ISTop infeed is 21-1/2" x 23".Currently has 1" thick swinging hammers. Screen included (not installed) has 1/2" dia. round holes. Has been modified to a pneumatic discharge.Includes sub base, motor pedestal and permanent magnet installed in infeed chute.