Identificador: 436
Abierta
Descripción
PARTE: 2GM-SBR-5216 - GUILLOTINA, DOBLADORA Y ROLADORA - 3 EN 1
Bed width: 52”
Shear capacity: 16 Ga
Bending capacity: 16 Ga
Rolling capacity: 16 Ga
Max bend angle: 90 deg
Min rolling diameter: 2-1/2”
Box depth: 4”
Power requirement: Manual
Shipping dimensions: 67” largo x 30” ancho x 46” alto
Shipping weight: 1210 lbs
Standard Features:
ISO 9001 certified
All steel heavy body construction
One year warranty for parts
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2CK-MX340M – ENCHAPADORA DE CANTOS AUTOMATICA
PARTE: 2CK-MX340M – ENCHAPADORA DE
CANTOS AUTOMATICANUEVA CON GARANTIACompact
design with best-in-class edgebanding result.The
MX340M is an entry-level edgebander with the perfect blend
of quality and affordability. With fine attention to detail and quality
componentry, the MX340M can output high-quality edges on cabinet parts and
more. This machine is equipped with end trimming, flush trimming, PVC scraping,
and buffing. User-friendly controls and adjustments allow for efficient
chang...
AMXmachinery
CEPILLO 1 CARA - CAPACIDAD ANCHO 16” - POWERMATIC
PARTE: 12267 - CEPILLO 1
CARA - CAPACIDAD ANCHO 16” - POWERMATIC
USADO
- BUENAS CONDICIONES
MODELO
160
MOTOR 3
HP, 115-208/230V, 1 FASE, 60 HZ, 3450 RPM
AMXmachinery
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” - MOTOR 7.5 HP - AMX
PARTE: 1AM-3016 - SIERRA TRONZADORA - DISCO 16” -
MOTOR 7.5 HP - AMX
USADA
- MUY BUENAS CONDICIONES
CAPACIDAD DE CORTE:
ESPESOR MAXIMO: 2-1/4”
ANCHO MAXIMO: 9”
MOTOR
7.5 HP, 230/460V, 3 FASES, 60 HZ, RPM 3465
MOTOR
CONECTADO A 230V, CERRADO, US ELECTRICAL MOTORSVideo: https://vimeo.com/1057662877
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...