Identificador: 2579
Abierta
Descripción
PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303
Nueva con garantia
Frame/moulding width range: 6-150 mm (0.24"-5.9")
Frame/moulding thickness range: 6-100 mm (0.24"-3.94")
V-nail sizes: 7,10,12,15mm
Weight:56kg
Package Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)
Packing: wooden packing
Features
Any hardness of wood can easily nail corners
No power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machine
Foot pedal for front foot operation
Powder-coated steel base and extension tables; cast-iron main table
The machine can hit multiple nails in the same position
The whole plating parts and countertops make the whole machine more beautiful and the countertops more wear-resistant
6 months' warranty for the machines, not for the consumables
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALESNUEVA CON GARANTIACARACTERISTICAS220V/60HZ/3PH1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HPFeeding motor: 3Kw – 4 HP Stepless variable fe...
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
PARTE: AMX-10156 - EXTRACTOR DE TURBINA - 3 HP
USADO - MUY BUENAS CONDICIONES
MOTOR: 3 HP (2.2 KW), 220/460V, 3
FASES
ENTRADA REDONDA: 10”
SALIDA RECTANGULAR: 4” X 6”
MEDIDAS TOTALES: 22” ANCHO X 17”
FONDO X 25” ALTO
AMXmachinery
PRENSA DE TORNILLO 1/2 TON
PARTE: 2AR-3551 - PRENSA DE TORNILLO - 1/2 TONSe monta en la mesa de trabajo para montar y desmontar rodamientos, etc.Capacidades:1/2 tonAltura maxima 4-1/2"Diametro maximo 6-1/2"Radio de apalancamiento 20:1Arbor maximo: 1"Ram square: 3/4"Dimensiones de la maquina: 4" ancho x 9-1/2" largo x 10" alto