Identificador: 2388
Abierta
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
AMXmachinery1
Descripción
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
Has a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly automatically move in place.
- Spring loaded conveyor pin system ensures material is passed over the bottom cutterhead to resulting in a flat and uniform board prior to planing to thickness on the top head
- Spiral insert knife cutterheads with two-sided solid carbide knives produce a smooth finish with increased stock removal capacity and extremely quiet operation
- Heavy-duty cast-iron machine body and table for vibration free cutting
- Digital electronic thickness adjustment in INCH and MM (Inch = 0.001” / mm = 0.01mm resolution) for precise thickness control
- 16″ wide x 6.7″ thick planing capacity
- Cutterheads are spiral insert type with six (6) rows of carbide inserts
- (2) driven and (1) idle bed roll for superior feeding of even difficult material
- Swiveling control panel for more ergonomic access to machine controls
- Inverter variable speed control with feed speeds from 23 to 65 FPM
- Easy to access external handwheel adjustment of infeed bed
- Hard chromed worktable for high wear resistance
- Auto lubrication to conveyor chain, central lubrication for dovetail elevation guideways
- Section chipbreaker and sectional feed roller before top cutterhead
- Rubber outfeed top roller to prevent chip marking
- Over thickness safety shut-off bar across infeed.
- Ammeter for each motor on control panel to monitor motor load
|
Maximum working width |
16″ |
405mm |
|
Maximum working thickness |
6.7″ |
170mm |
|
Minimum workpiece length |
10″ |
250mm |
|
Minimum working thickness |
0.315″ |
8mm |
|
Bottom jointing head motor |
10 HP |
|
|
Top planing head motor |
15 HP |
|
|
Feed motor |
2 HP |
|
|
Table elevation motor |
½ HP |
|
|
Cutterhead diameter |
4″ |
101mm |
|
Knife information |
30mmx12mmx1.5mm |
60 knives / head |
|
Cutterhead speed |
5000 RPM |
|
|
Feed speed (variable) |
23~65 FPM |
8~24 m/min |
|
Dust collection |
2 @ 5″ diameter |
2 @ 125mm |
|
Table size |
19″ x 86″ |
482x2185mm |
|
Machine dimensions (LxWxH) |
86.6″ x 35.43″ x 66.93″ |
2200x900x1700mm |
|
Net weight |
4180 Lbs. |
1900 kgs |
|
Packaging dimensions |
90.5″ x 37.4″ x 72.83″ |
2350x1060x1940mm |
|
Gross weight |
4620 Lbs. |
2100 kgs |
|
Electrical Information |
460/3/60 = 33 amps | 230/3/60 = 66 amps |
|
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
DOBLADORA DE METAL 5' X 3/16''
DOBLADORA DE METAL 5' X 3/16'' PARTE: 2GM-05316EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is...
AMXmachinery1
SIERRA ESCUADRADORA - 8 PIES
PARTE: 2CK-D405M-8Is the ideal panel cutting solution for kitchen cabinet shops, millwork companies, and furniture shops who need a precision saw but have limited floorspace. The machine combines a heavy-duty construction with cast iron main table, cast iron saw carriage, and precision sliding table resulting in precise panel sizing with high accuracy and repeatability time after time. The double roller sliding table runs effortlessly and smoothly and the crosscut miter fence can be easily...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
AMXmachinery1
ROUTER CNC – 4 X 8 PIES – MOTOR 8.6 HP (6 KW) – MESA VACIO
PARTE: STANDARD-408 – ROUTER CNC – 4 X 8 PIES – MOTOR 8.6 HP (6 KW) – MESA
VACIO
Nuevo con garantíaMesa 4 X 8 pies y 5 X
10 piesOptional: Rotary axis / lathe Inspection services: Machine Gantry X Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Y Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Z Axis ball screw Parallel vertical accuracy 0.001” (0.03mm)Machine Re-position accuracy 0.001” (0.02mm)Machine working accuracy 0.002” (0.05mm)Grating ru...