ID: 2275
Open
Description
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
Nueva con garantía
Para palos de escoba, trapeadores y recogedores
Alta produccion
Capable of producing multiple rods or two-sided moulding at high production rate.
• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.
• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.
• It can use flat board without per-cutting.
• Variable speed feeding for fast and easy adjustment.
• Industrial full power motor for maximum cutting capacity.
• Precision sealed long-life bearing.
• Heavy cast iron frame and table for durability usage.
• Designed for high production performance.
• Number of round rods per pass is determined by the diameter to be cut, maximum cutting width is 4" (100 mm).
• Cutting capacity: Ø2- Ø30 mm in diameter.
• Magnetic switch control.
• Easy adjustment in every way, more convenient than competitors on the market that saves your adjustment time.
| SPECIFICATIONS | |
| Max. Working Width | |
| Range of Rod Diameter | 1/8" - 1-1/8" |
| Motor Top Spindle | 7.5 HP |
| Motor Bottom Spindle | 7.5 HP |
| Feed motor | 1 HP |
| Spindle Speed | 6500 RPM |
| Feed Speed | 15 - 45 FPM |
| Max Cutter Diameter | 4" |
| Spindle Diameter | 1-1/4" or 30 MM |
| Dust Hood | 4" x 2 |
| Machine Size & Weight | 70" x 33" x 49" - 2400 LBS |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
PARTE:
AMX-10081 - EXTRACTOR DE TURBINA - MOTOR 1 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
CINCINNATI FAN
MODEL: PB-9
TAG: PO:180203-1
S/N: 1801810-1,
MOTOR 1 HP, 115/208-230V
10.10/5.64 - 5.06 AMPS
1 FASE, 60 HZ
3500 RPM
ENTRADA 4" DIAMETROSALIDA 4" DIAMETRO
MEDIDAS: 15” ANCHO X 21” LARGO X 17” ALTO
6,500.00 MXN
AMXmachinery
PARTE: 12555 - SIERRA TRONZADORA - 10 HP - WHIRLWIND
PARTE: 12555 - SIERRA TRONZADORA - 10 HP - WHIRLWINDUSADA
- BUENAS CONDICIONES
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...