Identificador: 2473
Abierta
Descripción
PARTE: 2CA-RM150 - BASTONERA - CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIA
- The unit is designed solely for shaping of round poles in wood working factory.
- The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.
- The cutting head has been proven flawless through experience and study of many years.
- The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board, carbon, bakelite, bamboo and wood.
- A hand wheel is provided to adjust simply the feed rollers.
- Wood fragments and dust are cleared off from the unit thoroughly in coherence with spindles revolution.
- Cutting of each type and size of workpiece will be carried out by specific cutter head and rollers for finished products.
- Automatic feeding, one-piece cast iron base.
- High-efficiency industrial TEFC motor for powerful cutting.
Design and specifications are subject to change without prior notice.
| SPECIFICATIONS | ||
| Motor of Main Cutter | ||
| Feed Motor | ||
| Cutter Speed | ||
| Feed Speed | ||
| Total Knife | ||
| Working Size | ||
| N.W. | ||
| G.W. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
PARTE: 12452 - TALADRO MULTIPLE - RITTER
PARTE: 12452 - TALADRO MULTIPLE -
RITTER
USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 1SL-DC-WPM13 - CUCHILLAS PARA MOLDURAS - CEPILLO MOLDURADOR
PARTE: 1SL-DC-WPM13 - CUCHILLAS PARA MOLDURAS - CEPILLO MOLDURADOR Espesor 1/8”, ancho de 25mm y 35 mmPARTE #DESCRIPCIONDC-WPM13-1Clave 1 (longitud de corte 2-1/2”)DC-WPM13-2Clave 2 (longitud de corte 3” )DC-WPM13-3Clave 3 (longitud de corte 4-1/2”)DC-WPM13-4Clave 4 (longitud de corte 6”)
AMXmachinery
PARTE: 2RT-001 - ARMADORA DE TARIMAS - SEMIAUTOMATICA - DESDE 30X30 PULG HASTA 50X48 PULG
PARTE: 2RT-001 - ARMADORA DE TARIMAS - SEMIAUTOMATICA - DESDE 30X30 PULG
HASTA 50X48 PULGNueva con garantiaDesde 30” x 30”
Hasta 50” largo Barrote x 48” anchoMaquina para tarimas de 3 y 4 barrotesMedidas especiales disponiblesCompletamente neumatica, no requiere electricidadLista para trabajarOpera con solo 1 personaNo incluye las clavadoras, puede montarse cualquier estilo de clavadora (Bostich, Silverline, etc)Las clavadoras se fijan solo con 2 tornillos y los disparadores con una ...