Identificador: 407
Abierta
.jpg)
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLE
AMXmachinery
Descripción
PARTE: 2CA-BR-25NUR/BR-25MILL - TALADRO HORIZONTAL CON O SIN CABEZAL MULTIPLE
| Specifications | 2CA-BR-25KNUR / MILL |
|---|---|
| Motor Standard | 2 HP |
| Spindle Speed | 2900 RPM |
| Knuring / Milling Cutter heads | Optional by Customer request / Design |
| Stroke Distance | 0~3" (0~80 mm) |
| Table Size | 11.4" x 11.2" (290 x 285 mm) |
| Machine Size with Stand | 42" x 19" x 42" (1067 x 483 x 1067 mm) |
| Machine Size W/O Stand | 40" x 15" x 28" (1016 x 381 x 711 mm) |
| Packing Size | 44" x 21" x 44" (1118 x 521 x 1118 mm) |
| N. W. | 331 LBS (150 kg) |
| G. W. | 375 LBS (170 kg) |
- The BR-2SKNUR machine is Designed for knurling operations on the turned end to achieve secure jointing effect.
- The machine is a high production, automatic unit and is pneumatically operated with air clamp by a foot switch for convenient operation.
- The machine is supplied with one knurling cutter head as standard.
- Further sizes of knurling cutting head are supplied as optional.
- The BR-25MILL machine is designed for producing a round or taper section at the end of rod turning.
- The unit is pneumatically operated with air clamp and controlled by a foot switch for convenient operation.
- The machine is supplied with one set of cutter head as standard, cutter head diameter as per customer’s specification.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12655-11 - ABRILLANTADORA RADIAL
PARTE: 12655-11
- ABRILLANTADORA RADIAL
USADA
PARA TERMINADOS PERFECTOS, ADAPTABLE A CUALQUIER TIPO
DE INDUSTRIA DEL MUEBLE
HACE EL TRABAJO QUE 6 PERSONAS HARIAN CON 6 REHILETES
PRECIO ACCESIBLE Y BAJO MANTENIMIENTO
ESPECIFICACIONES TECNICAS
LARGO MAXIMO DEL BRAZO
1550 MM
AMXmachinery
POSTFORMADORA
PARTE # 2EV-0138 - POSTFORMADORA - 8 PIES LARGO 1 LADO - EVANS 0138 All Form 8' capacity- 220 Volt, 1 Ph., 60 Hz, 20 amp. Or 380 Volt, 3 Ph. 50 Hz- 100 PSI air required 1 CFM (2 CFM if using vacuum clamp)- Standard Features: - Overhead clamp and vacuum system- Forming length capacity 100"- 1 ½” maximum forming radius. (3” thick material)- Foot print 4' wide X 11' long- Thermostatically controlled heater, ambient to 500 degrees Fahrenheit- Integrated timer. I...
AMXmachinery
PARTE: 1SL-DC-DC2043 - COLECTOR DE POLVOS 3 HP
PARTE: 1SL-DC-DC2043 - COLECTOR DE POLVOS 3 HPNUEVO CON GARANTIAMOTOR: 3 HP, 220V, 60 Hz, 2 FASESCAPACIDAD DE SUCCION: 2,300 CFMNUMERO DE BOLSAS Y FILTROS: 2 ARRIBA Y 2 ABAJOPESO: 59 KGSTIPO DE EMPAQUE: 1 CAJAMEDIDAS CAJA: 116 CM LARGO X 58 CM ANCHO X 57 CM ALTO - 57 KG
AMXmachinery
SIERRA DE PANELES
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICAAn Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in ItalyAs compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets. Occupies about the same footprint as a sl...