Identificador: 2686
Abierta
.jpg)
.jpg)
PARTE: 1SL-DC-BGR700-SD - DISCO DE AFILADO - PARA AFILADORA DE DISCOS DC-BGR-700
AMXmachinery
Descripción
PARTE: 1SL-DC-BGR700-SD - DISCO DE AFILADO - PARA AFILADORA DE DISCOS DC-BGR-700
Diámetro exterior: 4-3/4 pulgada
Espesor: ½ pulgada
Diámetro interior: 1-1/4 pulgada
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
LIJADORA 52"
PARTE # 2TA-WS-DA5275 - LIJADORA - CALIBRADORA - 52" ANCHOCabezales: 2 cabezasCapacidad: 52" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure pos...
AMXmachinery
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachinery
PARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA
PARTE: 3NN-ULTIMATE3400 - ARMADORA DE SABANAS DE CHAPA – 3400 MMPARTE: 3NN-ULTIMATE2800 - ARMADORA DE SABANAS DE CHAPA – 2800 MMMachine SpecificationModelUltiMate 3400UltiMate 2800Veneer Strip Length450 ~ 3400 mm450 ~ 2800 mmVeneer Strip Thickness0.25 ~ 1.5 mm0.25 ~ 1.5 mmVeneer Strip Widthmin. 75 mm (85 mm for 1 strip)min. 75 mm (85 mm for 1 strip)Production Speedup to 15 ~ 20 cycles/min.up to 15 ~ 20 cycles/min.Electric Powerapprox. 28 kwapprox. 23 kwCompressed Air5 bar5 barDimensions ...
AMXmachinery
ESPIGADORA DOBLE DE CADENA - FRIULMAC
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatThe
ideal solution for double-end trimming and coping, with only one operator
required!Working
Length: 115 - 1500mm (4.52" - 59")Working
Width: 30mm - 250mm (1.18" - 9.84")Working
Thickness: 12mm - 50mm (0.47" - 1.96")Configuration:
Double-End Trim & Double-End Cope/ProfilingLeft
& Right Trim Motors: 4 HP EachTrim
Blade Diameter: 125mm - 180mmTrim
Blade Bore: 30mmLeft
& Right Cope/Prof...