ID: 457
Open
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KG
AMXmachinery
Description
PARTE: 1SIL-R-OXIDOALUM-60CH - OXIDO DE ALUMINIO- GRANO 60 - COSTAL 20 KG
PARTE: 1SIL-R-OXIDOALUM-80CH - OXIDO DE ALUMINIO- GRANO 80 - COSTAL 20 KG
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12435 - MOLDURADORA - 5 CABEZALES - WEINIG UNIMAT 300
PARTE:
12435 - MOLDURADORA - 5 CABEZALES - WEINIG UNIMAT 300
USADA - BUENAS
CONDICIONESGreat ConditionWell MaintainedShipping Dimensions: 10 ft x 7 ft x 6 ft
Shipping Weight: 4,500 lbs approx.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
PARTE: 12255 - TALADRO MULTIPLE - RITTER R19F1
PARTE: 12255 - TALADRO MULTIPLE -
RITTER R19F1
USADA - BUENAS CONDICIONES220V, 1 FASE, 60 HZ,
MFG. 2000
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 30”
PARTE:
12335 - CEPILLO 2 CARAS - CAPACIDAD 30”
USADO - BUENAS CONDICIONES460/60/3, 135 amps electrics
Standard Specifications:
- 32-3/8" wide
x (3/8” to 6") thickness work-piece capacity
- 13” minimum
length x 2” minimum width work-piece
- 50 HP, 230/460/3
top head motor
- 50 HP, 230/460/3
bottom head motor
- 6” diameter,
5,000 RPM solid steel cutterheads
- Helical
cutterheads with insert style knives
- 10 HP 15 HP
inverter-controlled feed motor, (30 to 80 ft/min...