Identificador: 2725
Abierta
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 36” ANCHO
AMXmachinery
Descripción
PARTE: 12653 - LIJADORA - CALIBRADORA - BANDA ANCHA – 1 LIJA - 36” ANCHO
Usada
Motor principal: 5 HP, conectada 440V, 3 fases
Motor avance: 1.5 HP, conectada 440V, 3 fases
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD 24”
PARTE:
12334 - CEPILLO 2 CARAS - CAPACIDAD 24”
USADO - BUENAS CONDICIONES
Standard Specifications:
- 24" x 6" work
piece capacity
- 12" min. length,
(6" min. butted) x 1/4" min. thickness
- 30 HP upper cutter head
motor, 20 HP lower head motor
- Whisper helical carbide
cutterhead, (1/2" max. depth of cut)
- 1 HP platen/thickness
elevator motor
- 5 HP variable speed feed
motor, (25 to 100 ft/min. feed speed)
- 2" concentric
chipbreakers with pressure rollers
...
AMXmachinery
PARTE: 12567 - REASERRADORA HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12567 - REASERRADORA
HORIZONTAL - 1 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas condiciones
3 Phase | 570V | 30HP |
Capacity is roughly 6" wide x 6" tall
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE # 2TA-TS-P3200MA - SIERRA ESCUADRADORA - 3200 MM NUEVA CON GARANTIAHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carri...
AMXmachinery
PARTE: 12570 - 2 TANQUES DE AGUA - CAPACIDAD 30,000 LT C/U
PARTE:
12570 - 2 TANQUES DE AGUA - CAPACIDAD 30,000 LT C/U
UsadosAcero inoxidableCapacidad 30,000 litros c/u
Dimensiones 3.30 m diámetro x 3.3
altura